Mr BEEN Posted September 14, 2004 Share Posted September 14, 2004 Hi,I only would ask you if there are others having Problems with Multiboot CD-DVD and Windows XP Home/Prof./Corp. "INCLUDING SERVICE PACK 2".There are several other possibilities which do not function too, like:BCDW [bOOTABLE CD WIZARD] http://bootcd.narod.ru/index_e.htmorhttp://www.magiciso.com/tutorials/miso-cre...multi-os-cd.htmI think all have a PROBLEM with SETUPLDR.BIN of WinXP SP2.The chosen System in the Boot_Menu isn't installed, but the System is REBOOTED!!!!!!!!!!!Is there already a solution for this Problem?????Thanks.I would like to help solving this Problem Link to comment Share on other sites More sharing options...
Alanoll Posted September 14, 2004 Share Posted September 14, 2004 the simple fix would be to simply use the bootsector rather then the setupldr.bin file. Link to comment Share on other sites More sharing options...
Mr BEEN Posted September 14, 2004 Author Share Posted September 14, 2004 to Alanoll,using Setupldr.bin from SP1 functions too, but I never tried to install a Windows XPSP2 completely. Link to comment Share on other sites More sharing options...
Jito463 Posted September 14, 2004 Share Posted September 14, 2004 I usually use the xpboot loader to launch it, but you still have to edit the setupldr.bin file to point to the new boot directory if you use something other than i386 (which most people with multi-boot discs do). Link to comment Share on other sites More sharing options...
prathapml Posted September 14, 2004 Share Posted September 14, 2004 Its been about a month since I slip-streamed SP2 into my WinXP, and made a multi-boot of the CD. Through all the constant changing of the install, and adding/removing things in it, I haven't found any difference in how a multi-boot with/without SP2 works.Everything works the same way WITH SP2 files, as it used to with SP1.Possibly user error? You might want to read the stickied thread in this Multi-boot section. Following the multi-boot maker guide, you will have a properly done disc. Do post back on any problems you encounter, help is always here. Link to comment Share on other sites More sharing options...
Mr BEEN Posted September 14, 2004 Author Share Posted September 14, 2004 to prathapmlI have wasted 200hres testing this Multiboot CD-DVD, always with the same result:REBOOT instead of installing the chosen item.read this thread - http://bootcd.narod.ru/index_e.htm - there is written in REDthat WINXP SP2 has a problem with SETUPLDR.BINsame problem with MagicISOhttp://www.magiciso.com/tutorials/miso-cre...multi-os-cd.htmI studied the guide - multi-boot maker guide - http://flyakite.msfnhosting.com/ - you proposed here and he is applying the same technique to create a Multi-boot CDso, same problem!!OR can you pretend that you have tested it with WINXP SP2 without any PROBLEM??Thank you very much for your prompt answer Link to comment Share on other sites More sharing options...
Jotnar Posted September 14, 2004 Share Posted September 14, 2004 Most boot loaders (ISOLinux, cdshell, etc...) seem to use the cd-rom boot sector from a windows CD to kick off the boot process. With SP2 that works fine, there is no difference. You hex-edit the same files as before and everything works. If BCDW loads the setupldr.bin directly I guess it could have some issues. I don't see why it wouldn't use the normal setup sequence of xpboot.bin -> setupldr.bin -> txtsetup.sif to start.Cheers Link to comment Share on other sites More sharing options...
Alanoll Posted September 15, 2004 Share Posted September 15, 2004 FLyakite's site uses a different method, and CDShell has no problem with loading it. He uses SETUPLDR.BIN in conjuction with a sepereate boot folder.My Multiboot DVD works with this method. I HAVE tested it, and HAVE installed from this DVD on a couple systems. It does work.If you load SETUPLDR.BIN directly BCDW doesn't know where to start like it did with SP1, which is why calling the BOOTSECTOR of the original XP CD (albeit modified) which then calls SETUPLDR.BIN works, as it's the original mechanism used to get the setup going. Link to comment Share on other sites More sharing options...
Jito463 Posted September 15, 2004 Share Posted September 15, 2004 Have also tested here. Only just recently got around to adding my SP2 (pre)installs to my multi-boot disc, though. But they work fine.Note that on the link you provided, he specifically said:Warning!Loading of SETUPLDR.BIN from WinXP SP2 is not supported by current version of BCDW.This doesn't mean you can't use the xp boot loader, just that you can't use setupldr.bin. Do it like Alanoll and the guide on flyakite.msfnhosting.com say, and it should work fine. Link to comment Share on other sites More sharing options...
Mr BEEN Posted September 15, 2004 Author Share Posted September 15, 2004 O.K. I'll give your proposals a try and I'll publish the results here, because it seems that a lot of people have a problem builing a Multi-boot DVD-CD using one of the 3 methods discussed here.Thanks Link to comment Share on other sites More sharing options...
neo_01 Posted January 14, 2006 Share Posted January 14, 2006 Anybody knows what is the answer for this problem?I use flyakite giude but, it isn't works. (I use my Hungarian xp Install disc) Link to comment Share on other sites More sharing options...
cdob Posted January 16, 2006 Share Posted January 16, 2006 BCDW 2.01a support XP SP2 setupldr.bin.http://www.bcdwb.de/bcdw_e.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now