raz_1234 Posted September 13, 2004 Share Posted September 13, 2004 Hi All,Can not make my Ris work with that card in the client computer, getting "The network card driver is not in the image". I am using Windows2003 server as the Ris server (not in image, rather in unattended mode). I tried following suggestion to get the Network Driver Pack, did not help (they don't work I think in the text mode part of the instalation, where there are needed), tried what Microsoft suggested (i.e. create a $OEM\$1\Drivers\Nic) and put it in there, did not help. I tried both the Signed and unsigned versions of the driver. What am i doing wrong?thanksRaz Link to comment Share on other sites More sharing options...
nws Posted September 13, 2004 Share Posted September 13, 2004 Copy your NIC drivers (.inf, .sys and .cat) to i386 folder and after that Run RISSetup again with "just checking errors". Then your network boot should work Link to comment Share on other sites More sharing options...
raz_1234 Posted September 13, 2004 Author Share Posted September 13, 2004 I did that before, did not help. All the files from the WHQL driver version are both in the $OEM$\$1\Driver\Nic, in the I386\ and still the same message.I will try a newer version (not signed) to see if it makes a difference. Link to comment Share on other sites More sharing options...
raz_1234 Posted September 13, 2004 Author Share Posted September 13, 2004 Well, the new version did it! just copy all files to both I386 and the OEM folder. Link to comment Share on other sites More sharing options...
Annita Posted September 13, 2004 Share Posted September 13, 2004 Where did you get 3com 3c940 new drivers??? Which ones work???Could you post please the page??Thnx,Annita Link to comment Share on other sites More sharing options...
staun Posted February 26, 2007 Share Posted February 26, 2007 BUMP.Same problems with the 3c940-driverWorks fine in the PXE boot, files are transfered and the install starts. But when windows starts to configure it self the network-drivers are not loaded and then no other drivers are installed??I have copied the inf etc files to i386 and I have the Nic files in $oem$..\nic folder and added the folder to the driver-path in the SIF-fileHope anyone can help me on this. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now