I have made 3 disk for unattended install all of them work but with 1 problem. I have it set up to install my network card drivers.But everytime I try the install the drivers don't load. I followed the steps to a tee but no luck. The first problem it keeps asking for my network card drivers cd and i'm not sure if I have the path right in the winnt.inf file.This is the path I typed is it wright or wrong $OEM$\$1\Drivers\001_network

I put this post in another spot by accident sorry about that.

Thanks Milton

Is that what you put in the OEMPnPDriversPath? If it is, remove the $OEM$\$1\ . Make sure OEMPreInstall=YES. And try again.

PS. Sometimes it helps if you post yoru winnt.sif file

Here's my sif file I will remove the oem line.Any sugestions for the problem of it asking for the drivers disk. Thanks for the help Milton

winnt.sif

Edited May 28, 200422 yr by Milton

Remove your key and password...

I am curently making an unattend but i cant figure out wich drivers to put in for unattend (.inf, .cat) or wich files for my onboard Intel LAN.

What kinda LAN card do u use?

If u provide the corect driver files and path the windows should get them and install automatically w/o any problems.

Just in case put "DriverSigningPolicy=Ignore" in [unattend] in winnt.sif.

it could be the drivers are using tag files, if that's so, copy the file to where you copied the drivers. What drivers are yo using?

Open the INF file, and there should be a section near the top like

[sourceDisk] or something, with the following syntax

1 = %cdname%,%cdtag%

or something along those lines.

I'm using a Microsoft Mn-130 nic card here's my nic information file.

Thanks Milton

MN130.inf

does it tell you to enter this disk...

Microsoft® Broadband Network driver diskette

?

if it does, make sure BOTH MN130-51.sys and MN130-50.sys are in the SAME folder as the INF file. AND MN130.CAT