raid drivers gone screwy

[[BM]Crusher]

Previously, my disk has always worked good I added all the raid drivers I needed by hand (based on manufactureres txtsetup.oem files) and successfully had the Intel ICH5R SATA RAID DRiver, Silicon Image 3112 SATA RAID Driver, Via Integrated SATA RAID DRiver and the Promise 20376 SATA RAID DRiver...

today, I decided I should add the Silicon Image 3114 SATA RAID DRiver to cope with a new server system building today that uses the ABIT KV8-MAX3 mainboard...

I did the same as always, copied the driver folder to the $OEM$\$1\Drivers\3114 directory and added that path to the winnt.sif, added the correct settings to the txtsetup.sif and compressed the si3114r.sys to si3114r.sy_ and placed that in the I386 directory.. the same thing I have done for the other 4 drivers I have added..

also today, after I had added the 3114 driver, I compressed my drivers folder and set it up to extract as a DetachedProgram

I burnt the disk, sure that it would work perfectly, only to get an error saying the si3114r.sys file is missing or corrupt.... i double checked all my files and modifications to the txtsetup.sif and everything is perfect...

I remade the ISO image and decided to use Virtual PC 2004 to test it rather than make another coaster.. only to get an error about unable to load iastor.sys (it started to search the floppy drive).... I remade the ISO image and started again, this time it stopped at the si3114r.sys missing or corrupt message!?!?

I am using virtual pc 2004 but never before have i had an error with the raid drivers

[[BM]Crusher]

bah!

never mind

stupid typo

[sourceDiskFiles]

should have been

[sourceDisksFiles]

damnit I quadruple checked the txtsetup.sif additions i had made... stupid! bah!

some moderator please delete this topic i'm useless!

[RyanVM]

BAD CRUSHER, BAD!

(I'll spare you the shameless self-promo )