Hitachi Deskstar SATA Driver

[dazkrlauwste]

hello everyone,

Included with my new mainboard, a floppydisk with SATA drivers was provided for SATA HD's. Now in the Windows Xp setup screen, when I press F6 it asks me for a disk with SATA drivers. And only when I insert the SATA disk, Windows XP is able to recognise my HD. My question is, how do I integrate the SATA drivers in a XPCREATE CD, so when I install WinXP it won't have to ask me for SATA drivers.

Any help would me much appreciated.

[RyanVM]

http://greenmachine.msfnhosting.com/READING/addraid.htm

Or to make your life easier, just downoad the package in my signature and follow the directions in the readme.

[dazkrlauwste]

That's way too complex, isn't there a short and easy answer/sollution?

[RyanVM]

Nope. If there was, I would have told you.

The easiest way is probably the file in my sig, like I said before.

[dazkrlauwste]

Aight then, I'll check it out.

[RyanVM]

There's a pinned thread about it in the Drivers forum as well. Look for the one started by me.

[GreenMachine]

Zip and mail me your drivers. I will try to add them to the list of drivers XPCREATE can integrate. Then you should be able to add them into an XPCREATE CD as the other SATA.RAID drivers - there is a page about this: http://greenmachine.msfnhosting.com/XPCREATE/raid.htm. The link from RyanVM will tell you how to do this yourself. Or, as already stated, use RyanVM's SATA Pack.

Still ... I would like a copy of your drivers ...

[dazkrlauwste]

My drivers are already listed in your xpcreate.cab, except that these ones are updated to version 5.1.2600.220 I believe.

[dazkrlauwste]

I'm talking bout these drivers:

VIA ATA/ATAPI Host Controller" - 5.1.2600.104, 10/30/2003

"VIA RAID Controller" - 5.1.2600.210, 10/17/2003

"VIA Serial ATA RAID Controller - 5.1.2600.220, 10/17/2003

[RyanVM]

GM, I think you need to download a newer version of my pack. I noticed too that your xpcreate.cab is a bit outdated.

[GreenMachine]

That is what I was starting to think as well. What's the point in lewtting you do all the work, if I can't keep up on my end?

However, I think I see a RyanVM -> XPCREATE.CAB parser in the calling. I hate doing the same tasks twice.

On a side note, I did try adding as many SATA drivers as I could. Works fine virtually, but as soon as I try in my box with a 3112 DataLink card ... BSOD. Conflict somewhere, and it sure seems hardware dependent.

[dazkrlauwste]

So after I applied the patch.cmd from the raiddrivers pack, do I then need to cut the $OEM$ thats now inmy windows xp root folder and paste it in the FILESCD folder in xpcreate?

[RyanVM]

On a side note, I did try adding as many SATA drivers as I could. Works fine virtually, but as soon as I try in my box with a 3112 DataLink card ... BSOD. Conflict somewhere, and it sure seems hardware dependent.

I'll take a look into it. It's possible I need to add some PnPIDs.

[RyanVM]

Can you give me a link to the product page and/or drivers?

[dazkrlauwste]

Can anybody tell me what is the difference between a Windows XP Professional Retail & Windows XP Professional OEM?