todarsey Posted January 19, 2011 Share Posted January 19, 2011 I appologize if this is the wrong forum, but I figured either here on the Network section. I figured it could go either way. I just purchased a QNAP TS-639 which has iSCSI. It is loaded with 6 2TB drives in a RAID 6.Currently, I have 1 Win Server 08 running 6 VM's all on internal drives. I'm trying to plan for the future and I am wondering the best way to migrate the VM's over to the NAS. I am planning on sometime in the future to switch over to a Hyper-V cluster. With that being said, on the NAS, do I create an iSCSI target and mount that on the current server? Or, should I setup a file share on the NAS and run the VM from the share? It is my understanding that an iSCSI target should only be connected to one machine at a time. So, I am guessing that I shouldn't go the iSCSI target route if I am going to have a cluster. Link to comment Share on other sites More sharing options...
paraffin Posted February 1, 2011 Share Posted February 1, 2011 I am not sure about Hyper-V but in ESX multiple VM Hosts can attach to a single iSCSI target which enables the ability to use HA and DRS.I believe iSCSI should be your aim as the packet size is optimised for large data transfer even before you include Jumbo Frames. Link to comment Share on other sites More sharing options...
cluberti Posted February 2, 2011 Share Posted February 2, 2011 If you're using 2008 R2 Hyper-V, you can use Cluster Shared Volumes (CSV) in your cluster. This can be done over iSCSI (in fact, I set these up all the time). Just be aware of the speed you will get on your NAS and iSCSI before moving over, to make sure performance is acceptable. Some NAS devices are faster than others, and some iSCSI implementations are faster than others (using a fast NIC on a fast network isn't always going to bring you 100% success, so having a dedicated iSCSI HBA is always recommended).With all that said, you must be aware that the external storage device must support SCSI-3 persisitent reservations, and I don't believe the device you purchased does this. That would mean it would fail cluster tests, and as such would not be supported in a cluster configuration. You could probably still use the device as a mounted drive, but it would not be clusterable as shared storage (failover would... fail ). Note that FreeNAS does support this, so if you wanted to set up your own NAS solution for this, it could be done with free software. Link to comment Share on other sites More sharing options...
todarsey Posted February 16, 2011 Author Share Posted February 16, 2011 Thanks cluberti! Can you recommend a good entry level NAS that will do this, or is there such a thing? Link to comment Share on other sites More sharing options...
cluberti Posted March 4, 2011 Share Posted March 4, 2011 There's no such thing - you again could use a spare PC with FreeNAS, but to get a clusterable pre-built device you're going to spend a few thousand dollars for an iSCSI enclosure. Link to comment Share on other sites More sharing options...
todarsey Posted March 8, 2011 Author Share Posted March 8, 2011 Ok, thanks once again.I have been playing around with FreeNAS for the last couple of days and it seems to be missing the one freature I am looking for. That is the ability to upgrade/replace drives in the RAID configuration on the fly without having to create a new RAID set. Guess I'll have to keep looking or save up the funds to purchase what I need. Link to comment Share on other sites More sharing options...
allen2 Posted March 8, 2011 Share Posted March 8, 2011 If you have some more money, you might find a used raid controler (3ware, areca, adaptec) at a low price (i saw often 3ware ones for 50$ on ebay and of course they are only sata I). This way you won't get any problem replacing a faulty drive (with a fault tolerant array) or expanding the raid array. Link to comment Share on other sites More sharing options...
todarsey Posted March 11, 2011 Author Share Posted March 11, 2011 (edited) Well good new. Come to find out my qnap does support SCSI-3 persisitent reservations. I totally missed this when I was looking the first time. Scroll down to the iSCSI section.QNAP TS-639 Pro Turbo NAS Edited March 11, 2011 by todarsey Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now