November 2, 201015 yr I use "Ausogics Disk Defrag" as defragmenter. Some time I stop defragmenting or my pc is turned off automatically in the time of defragmenting if electricity is gone. So I start defragmenting next start up. After finishing defragmenting windows shows a massage "Windows will restart by 10 seconds" with option Ok/Cancel and after 10 seconds pc take restart. But after booting windows shows only bootskin for 3/4 seconds and takes restart again. Windows doesnot open any more. I've faced this problem many times. What can I do? Please help.
November 2, 201015 yr Press F8 repeatedly right before POST ends but before Windows booting starts and use disable automatic restart in case of system failure. See if that tells you anything.
November 3, 201015 yr I use "Ausogics Disk Defrag" as defragmenter. Some time I stop defragmenting or my pc is turned off automatically in the time of defragmenting if electricity is gone. So I start defragmenting next start up. After finishing defragmenting windows shows a massage "Windows will restart by 10 seconds" with option Ok/Cancel and after 10 seconds pc take restart. But after booting windows shows only bootskin for 3/4 seconds and takes restart again. Windows doesnot open any more. I've faced this problem many times. What can I do? Please help.
November 3, 201015 yr It sounds like a virus related problem... Try taking the hard drive out and put it in a running machine, make sure its jumped right and run it as a secondary drive and use your antivirus prgram to do an isolated scan on just that hard drive... usually that will take care of at leastthe virus problems you are having on that drive...I hope that helps ...LittleRed
November 4, 201015 yr Author It sounds like a virus related problem.Thanks all for helpful response. My PC is absolutely virus free (tested by avg, Kasparsky). For this problem I tried to boot in safe mode. But it does not run in safe mode too. I've replaced boot.ini, *krnl.exe, ntldr, NTDETECT.COM files and tried Recovery Console withe expand,fixmbr command. I've also disable automatic restart option. But same position. I think it is Ausogics Problem. Because I've used Ausogics in 3 PC and I've faced this problem in every PC. Edited November 4, 201015 yr by Kamrul08
November 4, 201015 yr my pc is turned off automatically in the time of defragmenting if electricity is gone. Ouch ! there's a difference between "turned off automatically" and put off without shut down. How often does that happen ?I don't think any defragmenter likes to be interrupted that way.
November 5, 201015 yr hi, I think you must check your RAM and fix it properly or repair the windows to run it easy.
November 5, 201015 yr Author hi, I think you must check your RAM and fix it properly or repair the windows to run it easy.My RAM is OK but I didn't try Reapair ever. I use "restore image" with Acronics True Image for this problem and it works fine. So I'm sure that my PC is not in hardware problems. I have been using Acronics True Image for for a long time. I don't install new windows.Whenever my windows makes me disturbed I use it. Just I wanted to know why my mentioned problem occurs?
November 6, 201015 yr uninstall Auslogics Disk Defrag.and try other defraging program like defragglerAnd see if restart problem still persist...
November 7, 201015 yr Author uninstall Auslogics Disk Defrag.and try other defraging program like defragglerAnd see if restart problem still persist...Good idea. Thanks.
Create an account or sign in to comment