I need Help

[avechuche]

There any way to run WPI without using $OEM$ folders?? How can we do? Thank!!

I use the $ OEM $ folder that is on the official site

I need to change this because I can not use F6 during OS installation

Sorry my english is bad

[johnhc]

avechuche, your English is fine. I do not understand why you cannot use F6 and therefore you cannot use $OEM$. Are you using nLite to create your ISO? You can use the $OEM$ folder unless you disable OEM Preinstall. If you really have an nLite question, please open a thread in the nLite forum and attach (not paste) your Last Session. Enjoy, John.

[avechuche]

I can use $OEM$ folder and desactivate "OEM preinstall" in winnt.sif?

OemPreinstall=Yes

This option is default to No but if you are using the $OEM$ Distribution Folders then it needs to be set to Yes, so that Setup regards this installation as a distribution and copies these files over to the system drive. This occurs at the end of Text-mode Setup.

Having OemPreinstall set to Yes will also prevent you from loading RAID/SATA drivers from a floppy disc during textmode setup. The only workaround for that problem is to directly integrate the drivers into the CD, as described here.

http://unattended.msfn.org/unattended.xp/view/web/19/

I need F6 to load some SATA drivers

Edited August 8, 2009 by avechuche

[johnhc]

avechuche, I agree with what you are saying. I use nLite to load my text mode drivers and leave OEM Preinstall to Enabled (default in nLite). To get a direct answer to your question, you will need to wait for mritter or Kels to respond. Sorry I could not help. Enjoy, John.

[avechuche]

"Avechuche = the $oem$ folder and cmdlines.txt IS USED during the t-13 phase of setup!

You ONLY need the oempreinstall=yes if you want folders to be copied over. Cmdlines.txt is used no matter what"

by Kels in other forum

Thanks johnhc for you time

Edited August 9, 2009 by Kelsenellenelvian

[johnhc]

avechuche, great, thanks for sharing. I am glad to learn one more thing! Enjoy, John.