Assigning a Fixed IP adress to the computer

[Minus30]

As the title says, how do I fix the IP adress of the computer during the unattended installation.

I take it I should add it to the sysprep xml file?

[maxXPsoft]

Autounattend.xml, works for me during <settings pass="specialize">

	<component name="Microsoft-Windows-DNS-Client" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
	  <Interfaces>
		<Interface wcm:action="add">
		  <DNSServerSearchOrder>
			<IpAddress wcm:action="add" wcm:keyValue="1">xxx.xx.xxx.xxx</IpAddress>
			<IpAddress wcm:action="add" wcm:keyValue="2">xxx.xx.xxx.xxx</IpAddress>
		  </DNSServerSearchOrder>
		  <DNSDomain>192.xxx.xxx.xxx</DNSDomain>
		  <Identifier>Local Area Connection</Identifier>
		</Interface>
	  </Interfaces>
	</component>

[Minus30]

I'll try that, thanks!

[Minus30]

That only worked to setup my DNS servers... I found this on another forum, in progress of testing it now

Ok,

I got this to work the static IP, subnet mask and default gateway. The

<identifier> by default is Local Area Connection but could be somthing

else. The IPaddress value with /24 give a subnet mask of 255.255.255.0

/16 would give 255.255.0.0 the nexthopipaddress gives the default

gateway. The prefix of 0.0.0.0/0 is something that finally got this to

work. I was getting setup error before this.

<settings pass="specialize">
<component name="Microsoft-Windows-TCPIP" language="neutral"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Interfaces>
<Interface>
<Identifier>Local Area Connection</Identifier>
<Ipv4Settings>
<DhcpEnabled>false</DhcpEnabled>
</Ipv4Settings>
<UnicastIpAddresses>
<IpAddress wcm:keyValue="1">192.168.0.1/24</IpAddress>
</UnicastIpAddresses>
<Routes>
<Route wcm:action="add">
<Identifier>0</Identifier>
<Prefix>0.0.0.0/0</Prefix>
<NextHopAddress>192.168.0.254</NextHopAddress>
<Metric>20</Metric>
</Route>
</Routes>
</Interface>
</Interfaces>
</component>
</settings>

[maxXPsoft]

I was looking at an old xml I had but will try what you have also.

[Minus30]

when it didn't work, I used netsh commands at the first logoncommands pass