jim5555 Posted July 23, 2008 Share Posted July 23, 2008 This is my first post here, so here goes.Can I use nLite to make a slipstream CD using the following:- Pre SP1, full Windows XP Home CD- SP2 CD- And a download of SP3Can you include two Service Packs in a single slipstream CD? or would it besafer to just slipstream Windows XP Home and SP2, and then do a standardWindows Update for SP3?Thank you. Link to comment Share on other sites More sharing options...
emgee1465 Posted July 23, 2008 Share Posted July 23, 2008 You can skip SP2 altogether, service packs are cumalative ie. SP3 includes everything that was in SP2 Link to comment Share on other sites More sharing options...
jim5555 Posted July 24, 2008 Author Share Posted July 24, 2008 Hi emgee1465, Thank you, but I'm not sure of that do to a article I read on Paul Thurrott's SuperSite for Windows:Q: Does SP3 include everything from SP1 and SP2 or do I need to install those first?A: Though XP SP3 aggregates all of the previously-released XP fixes, Microsoft now says that you will need to install at least SP1 on XP before installing SP3. The company recommends installing SP2 first as well, though that is not required.And this from Microsoft TechNet:General Requirements --------------------------------------------------------------------------------To install SP3, your computer must meet the hardware and operating system requirements listed below. In addition, your computer must at least be running Windows XP with Service Pack 1 installed.We recommended that you have Service Pack 2 installed before installing SP3. You can download Service Pack 2 at the Windows XP Service Pack 2 website.Hardware requirementsTo install SP3 on a single computer, your computer must have a CD-ROM drive and at least the following:A 233 megahertz (MHz) processor64 megabytes (MB) of RAM900 MB of available disk space during installationBut with that aside, can you make a slipstream Windows XP CD with multiple Service Packs?Again, Thank you very much. Link to comment Share on other sites More sharing options...
msdemich Posted July 24, 2008 Share Posted July 24, 2008 Microsoft now says that you will need to install at least SP1 on XP before installing SP3. The company recommends installing SP2 first as well, though that is not required.You need at least SP1 installed in order to install SP3 on a working install of XP. If you are going to slipstream it onto a CD, you do NOT need to slipsteam any other service pack at all. You can take an original XP CD from 2001, copy it to your hard drive and slipsteam SP3 to it, and you can make a working install CD from that.But with that aside, can you make a slipstream Windows XP CD with multiple Service Packs?Possibly, google "XP powerpacker" Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now