Network driver issue

[Tripredacus]

I am not sure if Intel pulled a stealth revision or what (they've done it before) , but we have two motherboards that do not work with both the WinPE 1.5 and 2.0. They are the DG33BU/FB and DQ35JOE. They both use the Intel PRO 1000 NIC (DEV_10BD) and they BOTH used to work with the PE versions we use here. I have installed the most updated driver for this device and WinPE 2.0 still does not see the network adapter after I initialize the network.

Any ideas or any problems with this controller recently?

EDIT: please move this topic to the Device Drivers forum.

Edited May 21, 2008 by Tripredacus

[WreX]

Did you add the XP or Vista drivers? Methinks you'd want the XP drivers in 1.5 and Vista in 2.x/

[Tripredacus]

Did you add the XP or Vista drivers? Methinks you'd want the XP drivers in 1.5 and Vista in 2.x/

While the two boards I listed use the Intel 1000, they actually use the 6032 inf and not the 5132 inf.... I took me a few hours to figure out. :\