joegill1234 Posted April 5, 2008 Share Posted April 5, 2008 I hope someone can help me.I have recently built a new PC using my old IDE drive and a new SATA drive.I get two different error message depending on the boot setup in the BIOS.First boot sequenceIDE hard drive then IDE CDError message<Windows Root> System32\HALL.DLL missing or corruptSecond boot sequenceSATA hard drive then IDE CDError messageNTLDR is missingPC HardwareMotherboard ASUS M2N-VM HDMI Chipset Nvidia GeForce 7050PV / nForce 630A (MCP68PNVT)Processor AMD Athlon Dual core 4400+Memory 2 Gig 800 mhzSATA Hard drive Hitachi Deskstar 160GIDE Hard drive Maxtor 4D040H2SATA DVD CD Burner TSST corp CDDVDW SH-S203DIDE CD Drive TEAC CD-W512EBNo floppy disk installedIDE Hard drive has two segments both with Windows XP SP2 installedSATA hard drive has Windows XP SP2 installed using nlite SlipstreamedSATA Disk setup as single drive not raid, I have not made any changes to the motherboard jumpersthey where left as recieved. I am quite happy to make change in the BIOS boot sequenceand if need be changes using command line.Hope this is enough information and that someone is able to point me in the direction to grt this fixed.Thanks Joe Stanton Link to comment Share on other sites More sharing options...
Th3_uN1Qu3 Posted April 5, 2008 Share Posted April 5, 2008 You need to integrate SATA drivers into your XP disc. Or better, switch SATA mode to "IDE" or "Compatible" in the BIOS, you've got to have that option in the Integrated Peripherals section. Link to comment Share on other sites More sharing options...
Ponch Posted April 5, 2008 Share Posted April 5, 2008 1)Did it work before or are you just transfering those two drives and XPs in a new system ?2) You say there are 2 XP installations on the IDE drive,you have to know which one is booted (tha active one obviously) and to what disk and partition its boot.ini refers for XP to start. I think that's the HALL.DLL missing cause. Link to comment Share on other sites More sharing options...
joegill1234 Posted April 5, 2008 Author Share Posted April 5, 2008 You need to integrate SATA drivers into your XP disc. Or better, switch SATA mode to "IDE" or "Compatible" in the BIOS, you've got to have that option in the Integrated Peripherals section.AS far as I can tell I have integrated the SATA drivers, but am unable to change to IDE or Compatible in the BIOS.Thanks Joe Link to comment Share on other sites More sharing options...
joegill1234 Posted April 5, 2008 Author Share Posted April 5, 2008 1)Did it work before or are you just transfering those two drives and XPs in a new system ?2) You say there are 2 XP installations on the IDE drive,you have to know which one is booted (tha active one obviously) and to what disk and partition its boot.ini refers for XP to start. I think that's the HALL.DLL missing cause.The E\ Partition is marked as healthy BOOT and is the one I am currently using.The C\ Partition is marked as healthy and system but I am unable to boot from it as when I try I get a string of number 99's. I am more than happy to delete this partition as I have copied all of the documents I need.For information, I have downloaded a free trial of 'Acronis drive ' and it does not see the SATA drive. I can copy to it but the computer management console cannot delete, format or change it in any way but I can see the drive properties.Thank you 'Ponch' for your advice.RegardsJoe Link to comment Share on other sites More sharing options...
joegill1234 Posted April 5, 2008 Author Share Posted April 5, 2008 1)Did it work before or are you just transfering those two drives and XPs in a new system ?2) You say there are 2 XP installations on the IDE drive,you have to know which one is booted (tha active one obviously) and to what disk and partition its boot.ini refers for XP to start. I think that's the HALL.DLL missing cause.[/quoteI have just done a search on the windows folder of the SATA drive and there is no sub folder NLDR. can I copy the one from the E drive windows folderThanks Joe Link to comment Share on other sites More sharing options...
Th3_uN1Qu3 Posted April 6, 2008 Share Posted April 6, 2008 1)Did it work before or are you just transfering those two drives and XPs in a new system ?2) You say there are 2 XP installations on the IDE drive,you have to know which one is booted (tha active one obviously) and to what disk and partition its boot.ini refers for XP to start. I think that's the HALL.DLL missing cause.I have just done a search on the windows folder of the SATA drive and there is no sub folder NLDR. can I copy the one from the E drive windows folderThanks JoeThe NTLDR is a FILE, and it is only visible when you select "Show All Files" and unselect "Hide Protected Operating System Files" in Folder Options. You can try copying it from your other drive, but most likely you're going to run into something else next. Link to comment Share on other sites More sharing options...
joegill1234 Posted April 8, 2008 Author Share Posted April 8, 2008 You need to integrate SATA drivers into your XP disc. Or better, switch SATA mode to "IDE" or "Compatible" in the BIOS, you've got to have that option in the Integrated Peripherals section.Thanks for the response. I have got the drive to work ok but in a round about way, I did a clean install on the IDE drive and deleted the old partitions thereby starting with a clean install.I installed Acronis True Image cloned the IDE to the SATA drive and it works fine.Thanks once againRegards Joe Link to comment Share on other sites More sharing options...
joegill1234 Posted April 8, 2008 Author Share Posted April 8, 2008 1)Did it work before or are you just transfering those two drives and XPs in a new system ?2) You say there are 2 XP installations on the IDE drive,you have to know which one is booted (tha active one obviously) and to what disk and partition its boot.ini refers for XP to start. I think that's the HALL.DLL missing cause.Ponch thanks for the response. I have got the drive to work ok but in a round about way, I did a clean install on the IDE drive and deleted the old partitions thereby starting with a clean install.I installed Acronis True Image cloned the IDE to the SATA drive and it works fine.Thanks once againRegards Joe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now