Cannot connect to internet through Dynex network card

[2boro]

I've had my pc for a while now, and have always had problems with connecting to wireless internet. First i thought it was the router, so i bought a new one, since that didn't work, i just got a new Dynex enhanced g desktop card. but still cannot connect. According to the software that came with the card (dynex WNU), it receives a very good signal strength, but will not connect to the 2wire router.

on the back of the card, there is one (of two) LED turned on and it is color orange.

i've been reading that people recomend to run an ipconfig so i did, but cannot understand what it means, so im posting it up, hopfully anyone can detect the problem (which im sure is very obvious and simple)

so here it goes.

windows ip config

host name ----------------------------:mono

primary dns suffix -------------------:

mode type-----------------------------:boradcast

ip routing enabled -------------------: no

wind proxy enabled--------------------:no

Ethernet adapter local area connection 2:

Media State -------------------------: Media disconnected

description--------------------------:Nvidia nForce Networking controller

physical Address---------------------: 00-13-d3-9d-7b-d1

Etherned adapter Wireless Network Connection 7:

Media State --------------------------:media disconnected

Description---------------------------:Dynex enhanced G desktop card

Physical address----------------------:00-1c-df-4d-82-63

pleaaaase any advice is appreciated

[tain]

It won't connect at all, or connects intermittently? Are you sure that you are connecting to your own router and not some other router that might be configured to deny anonymous access? Did you enable any security features on the router?