Windows Server 2003 R2

[deepwater]

G'day

I have just installed nLite to hopefully install the nvRaid drivers as shown here http://www.msfn.org/board/index.php?showtopic=51140

and I'm have a hell of a time even getting nLite to recoginise my CD.

So I want to outline my steps to see if I'm missing anything.

Copy every thing from my Windows Server 2003 R2 oem version CD (i.e. System builders version0) to c:\working\xp_cd

Then run nLite click next at the first screen> enter c:\working\xp_cd into the location area and press enter!!

Then I get the error I have seen here on these forums:

'Make sure that the selected folder or drive contains the 'i386' blah blah blah'

this is whats in my c:\working\xp_cd

Directory of C:\working\xp_cd

2007-08-29 18:44 <DIR> .

2007-08-29 18:44 <DIR> ..

2005-11-28 22:00 43 AUTORUN.INF

2007-08-29 18:43 <DIR> DOCS

2007-08-29 18:44 <DIR> I386

2005-11-28 22:00 54,033 LANGINST.INF

2005-11-28 22:00 197,120 OPK.MSI

2005-11-28 22:00 23,419 README.TXT

2007-08-29 18:44 <DIR> SAMPLES

2007-08-29 18:44 <DIR> SBSI

2005-11-28 22:00 233,472 SETUP.EXE

2007-08-29 18:44 <DIR> TOOLS

2005-11-28 22:00 10 WIN51

2005-11-28 22:00 10 WIN51IA

2005-11-28 22:00 10 WIN51IA.SP1

2005-11-28 22:00 167 WINBOM.INI

2007-08-29 18:44 <DIR> WINPE

2007-08-29 18:44 <DIR> WIZARD

9 File(s) 508,284 bytes

9 Dir(s) 151,769,649,152 bytes free

Please help me!!!

deepwater

[Kelsenellenelvian]

WIN51IA.SP1 <-- Shouldn't there be one of these that says "WIN51IA.SP2"

[deepwater]

EDIT: thank you for your reply.

WIN51IA.SP1 <-- Shouldn't there be one of these that says "WIN51IA.SP2"

The SP2 is actually on a separate CD that is install afterwards. Windows Server 2003 R2 is installed with the files listed first. Then you update it with the next CD after installing the OS first.

So there is no "WIN51IA.SP2" anywhere on my OEM disk. Does it matter that it is an OEM disk?

Edited August 29, 2007 by deepwater

[HotRod]

HAve you tried integarting SP2 into original?

Would only cost you a little time and a disc if it doesn't.

Extract 2k3 disc to C:\CRMEOEM_EN

put SP2 on c drive and rename SP2.exe

Run command C:\sp2.exe /integrate:C:\CRMEOEM_EN

When done integrating make new ISO and burn to disc. See if hardware seen. New drivers might have been added with SP2

[deepwater]

Thank you for your reply Hot Rod

I will have a look at doing that. I won't get a chance until Monday to have another crack at this. So I will be in touch when I do.