Jump to content
MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. ×


  • Posts

  • Joined

  • Last visited

  • Donations

  • Country


About nh_wzg

Profile Information

  • OS
    Server 2008R2

nh_wzg's Achievements



  1. nh_wzg

    FDV's website

    Fred Vorck's Site for IE uninstallation http://www.vorck.com/windows/ drop ? I can not open it again !
  2. The attachment is the files changed in the driver integrated before & after. Maybe it would help sb. to integrated the driver into the os_install CD directly , and not to use the nlite. I have tried to integrated this SATA driver with the FDV'S site guide directly, but i got the failed result. integrated.part2.rar
  3. The attachment is the files changed in the driver integrated before & after. integrated.part1.rar
  4. Feedback about the BlackWingCat SATA driver v7.6 for ICH10. After integrated the driver into my hfsliped windows 2000 server_en_sp4 with nlite , I installed the windows 2000 server os in a SATA II WD 1.0T HD normally. before integrated.rar
  5. I am taking the cludes below: 1.Win2000 and ICH8-8R-9-9R-10-10R 2. Win2K any hardware issues yet? 3.Some about the ide drivers with diffent co. may conflit in the os installation and make the bsod.->solution:All use the SATA CD/DVD-ROM to install the os. http://forum.driverpacks.net/viewtopic.php?id=3770&p=1 I wish I can make it out.
  6. Today i get a new PC with GIGABYTE EP43T-S3L (ICH10) + 500G SATA-2 HD. I tried to boot it with a FLOPPY DRIVEs I downloaded FROM BlackWingCat's site to install the HFSLIPED windows 2000 os. http://translate.google.com/translate?hl=zh-CN&sl=ja&tl=en&u=http%3A%2F%2Fblog.livedoor.jp%2Fblackwingcat%2Farchives%2F813816.html In IDE complicably MODE i could load the driver in floppy with F6 and got the fail message "Can not access bootable media ...",then failed in the Blue Screen. In AHCI MODE i could load the driver in floppy with F6 and got the fail message "Bad Pool Call",then failed in the Blue Screen again. And I have tried to integrated the driver (iastor.sys) with the FDV'S guide , but I get the same result above. Any cludes I can take? | +---uninstall | | istgun.exe | | | \---Lang | \---Storage | \---ENU | StorageENU.dll | \---Winall \---Driver iaAHCI.cat iaAHCI.inf iaStor.cat iaStor.inf IaStor.sys TXTSETUP.OEM files.txt
  7. I downloaded the oldest windows 2000 server fileset in my HD from fdv site long time ago. If you could not find this version in fdv site i thought a new version maybe is coming up. If you wanted to test with the old version you can sent me a mail for it.
  8. Today I have some time to try the old version fdvset for wnidows 2000 server with sp4. Step 1.I overwited the files in \i386 with fdvfileset directly.Then I made the iso file and installed it in vmware. Step 2.After skipped "ntapm.inf" in file copying process , selected the "ftp.mib" direct to virtual CD\i386\ftp.mi_ manually, canceled the "desktop.scf" copying , I installed windows 2000 server with fdvset successfully. IE had been removed and with no any new windows 2000 updates on it. So keep the interest in this old os and make fun in the research.
  9. Just like fileset for windows 2000 pro /XP , any cludes about windows 2003 server? I could find several topics in the search result in MSFN_HFSLIP,but could not get in again.
  10. nh_wzg

    FDV fileset for XP

    After commented some iteatapi.sys,megaide.sys,... in TXT... & LAY..., the system installed and startup successfully with the last fileset for XP. Found in CMD.EXE windows,the path is not "C:\WINDOWS..." but "%SystemRoot%..." and it make the "ping.exe, ipconfig.exe" fail to run in "c:\>". C:\Documents and Settings\Administrator>set ALLUSERSPROFILE=C:\Documents and Settings\All Users APPDATA=C:\Documents and Settings\Administrator\Application Data CommonProgramFiles=C:\Program Files\Common Files COMPUTERNAME=XPROEN01-1 ComSpec=C:\WINDOWS\system32\cmd.exe DEVMGR_SHOW_NONPRESENT_DEVICES=1 FP_NO_HOST_CHECK=NO HOMEDRIVE=C: HOMEPATH=\Documents and Settings\Administrator LOGONSERVER=\\XPROEN01-1 NUMBER_OF_PROCESSORS=1 OS=Windows_NT Path=%SystemRoot%;%SystemRoot%\system;%SystemRoot%\system32;%SystemRoot%\system32\WBEM PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE=x86 PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 7, GenuineIntel PROCESSOR_LEVEL=15 PROCESSOR_REVISION=0207 ProgramFiles=C:\Program Files PROMPT=$P$G SystemDrive=C: SystemRoot=C:\WINDOWS TEMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp TMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp USERDOMAIN=XPROEN01-1 USERNAME=Administrator USERPROFILE=C:\Documents and Settings\Administrator windir=C:\WINDOWS
  11. comntwks.inf dtcntwks.inf setup_w.bmp 1.Because all the listed files are all for workstation,I commented them all in LAY... & TXT...,and changed to appropriated files for server. ntapm.inf winnt.bmp winnt256.bmp I could not find listed files in server CD,then I commented them all in LAY... & TXT...,and make the ISO. 2.But i get the error message at last: Setup can not set the required windows 2000 configuration information. This indicates an internal Setup error. Contact your system administrator. Still i could not get any clues to deal with them. Anyone can help me?
  12. nh_wzg

    Fileset 9, all done

    Yes, i copied the several dir items in the TXT... & LAY... from the original cd file to try with the hivesys.inf,hivedef.inf in set 9,then the Simp Chi Lang support installed successfully. That is great! Thanks for your fileset 9. But still i don't know much about the agt*.*. I have not rolled back the changes in TXT... & LAY... I am just trying the other software to install in this excited os. Now i just wonder how to research the os(2k/xp/2k3...) component (what is the files,*.inf... useages) and what is the tools FDV used ? Thanks a lot .
  13. nh_wzg

    Fileset 9, all done

    In the last version of fileset 9,the NONENG.INF has gone. I can use the hfslip 1.7.9 + fdv fileset9 to remove the ie from windows 2000 pro en sp4. But i fail to install the "Simplified Chinese language" support in "Regional Option" that i had installed successfully in the pre_hfslip system. I had installed the "Simplified Chinese language" support in "Regional Option" like this: 1."Start"->"Settings"->"Control Pannel"->"Reginal Options" window. 2."Language settings for the system"->select "Simplified Chinese" 3."Settings for the current user"-> "Your locale(location)"->select "Chinese(PRC)" 4."Language settings for the system"->click "Set default ..." botton -> "Select System Locale" windows pop out ->select "Chinese(PRC)"->click "OK" 5.Click "Reginal Options" window's "Apply" botton. In the pre_hfslip system it would copy the appropriate language support files listed in the intl.inf and install the language support. But now I failed here and the Error window pop: Windows setup could not copy the appropriate files for Simplified Chinese. Make sure you have the correct path name for the files.After some searching in the msfn,I had uncommented all the "agt*.*" in the layout.inf,txtsetup.sif. After some searching in the google , I had copy the origal intl.inf,hivesys.inf,hivedef.inf to overwrite the "sourcess\i386" then make the new ISO to install the os. But still i got the same error windows. Anyone give me some clues about the new language support installation? Thanks.
  14. 1.After uncommented files following the cd can boot normally. ncrc710.sys lp6nds35.sys ql2100.sys 2.In the restart installing process,files following have to skip to continue the installation: comntwks.inf dtcntwks.inf ntapm.inf setup_w.bmp winnt.bmp winnt256.bmp 3.But i get the error message at last: Setup can not set the required windows 2000 configuration information. This indicates an internal Setup error. Contact your system administrator. 4.I can not boot the os normal. Invalid boot.ini. Boot from c:\winnt... In the starting windows window Windows 2000 could not start because the following file is missing or corrupt:\winnt\system32\config\SYSTEM You can attempt to repair this file by starting Windows 2000 Setup using the original Setup floppy disk or CD-ROM. Select 'r' at the first screen to start repair. Thanks for your helps.
  15. After dl the new version fileset for w2k srv and del&rename some file,I got the new iso to test. But I failed again. Installation process error: The entry "ncrc710.sys" in the [SourceDiskFiles] section of the INF file is corrupt or Missing. Setup cannot continue. Press any key to exit. Thanks a lot for FDV's fileset,it make me dig into the os again.

  • Create New...