Unclassified

If i got the WRT54gl i would be looking for something like this http://www.techbuy.com.au/products/32285/N...ard_-_54Mbs.asp to put in the pc, yes?

I just got cable internet and i need to split it between 2 computers. I was looking at the Linksys WRT54GL, it can be hacked with different firmware which is a plus but is thre anything bad with this router? Can anyone reccomend anything else thats around the same price thats better?

Im looking for a new harddrive and im just wondering will getting one with NQC have better performance than one without and is this a good choice for a harddrive http://www.auspcmarket.com.au/index.php?redir=http://www.auspcmarket.com.au/show_product_info.php?input[product_code]=HD-WD2500KS&input[category_id]=366

I have put it up to 3.28ghz and its stable but how high can the memory freq go on cheapo ddr2 ram, its at 688 now, will i damage the ram if i keep going up.

I have a socket 775 celeron d 2.5ghz and i only have the stock hsf and a 120mm fan in the powersupply pulling out hot air. I have put it up to 2.9ghz and its 30 degrees c on idle and about 41 degrees c under full usage and hasnt crashed. Would i be able to push it abit more or should i wait until i get better cooling and at 2.5ghz in the bios its detected at 133mhz fsb but the cpu is a 533mhz fsb, will this affect performance.

I ended up getting a gigabyte GA-8I945PL-G.there is a 4pin socket that im assuming it needs a cord from the power supply to plug into it and my psu doesnt have one, does this mean i need a new psu?

Thanks. Will any motherboard work in 64bit or do i have to get one designed for it and any recommendations on what motherboard to get thats fairly cheap but overclocks good. This motherboard here http://www.extremeoverclocking.com/reviews...925XE7AA_1.html says it supports 800/1066MHz FSB does that mean my 533mhz cpu wont work?

I have a Celeron D 2.53 ghz 533mhz fsb socket lga775 CPU and a Gigabyte 8s648fxp-rz(-c) socket 478 motherboard, which one would be better to keep and what would you reccomend getting. Keeping in mind that i will be overclocking and having dual display.

Sorry i forgot to add that i will be upgrading the cpu to about 1ghz pentium 3

Im going to be playing mainly nfs porsche and gta3 on it maybe some others like that but its not really a gaming pc and playing videos on my tv through s-video.

Thanks for the help , any recommendations of which graphics card i should get. im looking for one with s video out and would like 128mb but if i have to go to 64mb i will.

No the board works fine but when i put in the fx5200 there is just a blank screen when i start it up, it sounds like it boots into windows but i cant tell.

At the moment its CPU:Celeron 433mhz MB:Pcchips M754lmr Harddrive:Maxtor 2.67gb Modem:hspc56 Ram:Generic 376mb Onboard video:Alladin TNT2 I have tried without any thing plugged in but it still didnt work.

Im a bit confused now, it says on the box it needs 300w but i just checked the psu in my sisters pc which it worked fine in and it says the psu is 220w. This happened with a different video card as well, i think i tried a mx4000 or something and it did exactly the same thing as the fx5200

I have disabled it as far as i can tell. I just found out it needs a 300w powersupply, i have a lc-300atx which is 300w i dont know if its a generic or not but could it be that the graphics card isnt getting enough power.

Well i have no motherboards without onboard but i tried it in a old pentium166 and it did the same thing but when it booted up the speaker beeped two times. It works fine on a Abit SG-80.

Yeah its plugged into the pci slots, its all i have and the card is brand new so im guessing it works.

I just got a Geforce fx 5200 and im trying to put it in a pcchips M754 but when its all set up there is no display at all. I have disabled the onboard video i think and with the geforce in the onboard has no display even if it is enabled. Anyone know whats wrong?

Im not sure whats happened because my sister was using it and she is only eight and has no idea what she is doing. She said she pressed some buttons but she doesnt know what ones.

Thanks, the last known good configuration worked but do you know what would make this happen?

This isnt an actual screenshot but basicaly i just get this stretched across the whole screen.

When the windows logon screen comes up, the only thing that i can see is the turn off computer option, it looks like its zoomed up or at a really low res. The only thing i know is that some buttons got pressed and it came up like that. Anyone know whats wrong? Please NOW in Microsoft Windows XP section, use [TAGS] in your topic's title. See rules. --Sonic

Is this ram any good. Corsair TWIN2X1024A-6400 1GB (2x XMS2 512MB) Twin2X PC-6400 DDR2 RAM, 2x64Mx64non-ECC, 240-pin DIMMs, Unbuffered, 5-5-5-12 and will it work on the Asus A8N SLI Premium?

Thanks for the help.

Ive decided on the Asus A8N SLI Premium and the athlon64 3800+ x2 and i can get both of them for about $569 is that a good deal. And what graphics card would be best to start out with, im just going to get one to start with.