alucke
Content Type
Profiles
Forums
Events
Posts posted by alucke
-
-
I have an Acer laptop that originally had windows 7 home premium x64 on it. I recently installed Windows 7 pro SP1 x64. Ever since I install win 7 pro, the CPU won't below 20% usage. The system Idle Process is at 88%. Maybe the laptop can't run windows 7 pro. any ideas? any help would be appreciated.
alucke
0 -
I am having the same issues with FFaM 1.0.2.11.
0 -
-
-
I also get an error when trying to integrate SP1 RC1 (Wave1).
RT7lite 2.4.0 used with Windows 7 Ultimate.
alucke
0 -
i use AS5. I have tried every way possible, from a little dot to using it as paint. i even purchased a corsair H50, and that didn't even do a thing. i never overclock my computer, so everything is stock.
0 -
I have done that several times, thinking i put to much paste on. It is still idling at 58-60C.
0 -
I am have an AMD Phenom 9850x4 black edition processor that started running hot earlier this week. When i first got the CPU it would idle around 37C and 47-50 with a full load. Earlier this week i noticed that the CPU would idle around 47C. Today i noticed that its idling around 58-60C. So I shut the computer down. My house has AC, which is set at 70F. Is this a sign that the CPU is going bad? Any help would be appreciated?
alucke
0 -
It does not work for me. I select where the installation files are and a windows pops up saying "Please select a valid Windows 7 Operating system" I am currently running Windows 7 Ultimate x64.
Any help would be appreciated
alucke
0 -
My mother-inlaws computer crashed, I am reinstalling Windows 7 Ultimate Retail for her. For some reason, during the expanding files section of the install, it is going really slow. It took almost an 1 1/2 hours for it to reach 89%. Could that be because of a bad harddrive?
0 -
I have a DFI LanParty DK 790FX M2RS, AMD Phenom 9850 quadcore CPU, ATI HD 4850 PCIE Graphics card, 4 Gigs of RAM, Windows 7 Ultimate. I am trying to integrate the Windows 7 Chipset drivers found here: AMD/ATI Windows 7 Drivers into the Windows 7 Source DVD, Everytime i run Windows 7 setup in Virtualbox I get a BSOD during the setup process. any help would be appreciated
0 -
Anyone know how to integrate ATI/AMD Chipset drivers into Windows 7 Source Disc? Everytime i integrate the drivers, I get a BSOD during Windows 7 install.
alucke
0 -
I have an old CRT Monitor that i am still using. Every so often the screen gets distorted. Does that mean the monitor is going bad?
0 -
I tried to integrate IE8.msu with vlite into Vista Ultimate SP1 DVD. I get a configuring updates loop VM. Anyone got any ideas?
0 -
do all the images have to be the same size as the ones being replaced?
0 -
hey check this post out: Interactive Logon Error
0 -
I installed Vista SP1 unattended using the generalized setting as previously posted. For me, it ran without any problems. I am posting this reply while using Vista SP1.
0 -
I will give it a shot tomorrow., and i will post the results.
0 -
I created unattend.xml and put it in the root of the DVD. I used this setting %WINDIR%\system32\sysprep\sysprep.exe /generalize /quiet /oobe /reboot /unattend:%DVDRoot%\Unattend.xml in the last audit user pass runsyncronuous command of the Autounattend.xml. I ran Vm 2 times to test the above settings and they work perfectly for me. I uploaded a copy of my basic unattend file below. Thanks to Wabaunza for pointing the the settings in a previous post.
0 -
I will have to try that.
0 -
I am using Vista + SP1 DVD and WAIK 1.1
0 -
I tried it with VM and computer. Either way, I get it to shutdown. Then i restart setup, it says a critical error has occured and is unabled to continue.
0 -
i created an unattend.xml file with WAIK. When i run Vista Setup, I get an Interactive Logon error when entering Audit Mode. I followed FireGeier's unattended guide. Can't figure out why its not working. I attached my autounattend file. Hopefully i can get some insight to why Vista is giving me error when booting to Audit mode, during Vista Setup.
0 -
Yes, they work in Vista unattended without a prompt
0
driver locked memory
in Hardware Hangout
Posted
I currently have a Gigabyte Ga-990fxa-ud5 R5 with 32gb of ram installed. The other day I upgraded to a 500gb ssd. Then the problem started. Windows 10 x64 system window started showing 32gb/16gb usable. So I downgraded back to 8.1 x64. downloaded Rammap from Microsoft, and ran it. It showed that I have 16gb driver locked on the motherboard. Before I upgraded all 32gb's were usable. I wasn't running any vm's what so ever. I have researched the problem for over a day, now. And all the searches came up with driver locked memory with vn's installed, which was no help what so ever. I have posted on several other computer forums, and have a support ticket with gigabyte. about the problem. Does anyone know how to unock driver locked ram? if so can you give me a step by step guide to fix the problem?
Alucke