Jump to content

Schechi

Member
  • Posts

    7
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Germany

About Schechi

Schechi's Achievements

0

Reputation

  1. So I found a solution to create a primary partition when using windows 2003 sp1 as a source for the PE Iso. I simply changed the diskpart.exe before creating the iso file. I used the diskpart.exe from windows server 2003 without sp1... So far so good but there is the next problem... After I created the partition with diskpart I want to format this **** partition...once again there is no go. I am not able to format the created partition. I also changed format.com as I did with diskpart.exe but in this case this didn´t work. The error is "unkown file system". If I use A43 File Management Utility and look at the properties of my created partition the file system is RAW. At the creation with diskpart I enterd to use NTFS as file system. So maybe changing the diskpart.exe resulted in this error or something with the format command in the PE Environment is wrong when using Windows 2003 SP1 as source for the iso. Any ideas? Schechi
  2. I created the PE IMage new once with SP1 integrated in the Windows 2003 Sources. I also tried to create a PE Image with Windows 2003 source without SP1 and then putted ntldr ramdisk.sys ntdetect.com ntoskrnl.exe from SP1 into the sources before creating the ISO so that the PE Image is bootable over TFTP. This resulted in a bluescreen while booting. If I use Windows 2003 without SP1 and I boot from CD everything is fine. But I want to boot the ISO over TFTP...
  3. I boot Bart PE over TFTP Download from TFTD32 not from HDD. When I booted Bart PE the system Drive is X which is shown as CDrom but i fact it is a RAMDRIVE.
  4. Normally I use Diskpart with diskpart.txt. This time I tried using diskpart manually --> Open CMD after Barte PE started up --> diskpart --> select disk0 --> clean --> create partition primary Size=4000. At this point "disk management serice cannot complete..." error
  5. I enabled the plugin and I also modified the dcomlaunch.inf as described. Diskpart now starts but I can´t create a primary partition.... Any idea? Thanks
  6. Hi, I´ve the same problem with windows 2003 sp1. I can´t create a primary partition within diskpart. Is there any solution yet. Thnx
×
×
  • Create New...