rajesh.kumar

i connect 2 computers. one has 2 network cards and another has one to connect to this computer. when lan is connected, both computers repeatedly says 'network cable unplugged' and 'connected' and both msgs repeat each second one after the other until i unplug the cable. i didnt remove NLA or any service.

KB920342 doesnt allow themes to activate if slipstreamed. i manually tested many times to identify the problem is with this update. and now eliminated that fix from slipstreaming and works fine now. check whether ur fixes contain this update.

@ Jancm : can u tell me if u r integrating ie7 too. i integrate ie7. my xp gives error saying 'cannot save configuration information...' after the initial setup copying files and after 'saving configuration..' before restarting. i get this only after i started integrating feb07 patches. i found that the problem is in any of the following patches : KB918118.exe KB924667.exe KB926436.exe KB927779.exe KB927802.exe KB928843.exe KB931836.exe. After i removed these patches, it works fine. i planned to install 928090 and 929969 during RunOnceEx due to some other error during initial setup copying files(which i found out to be with 928090), so i didnt add them to nlite. i tried creating the distribution 5-6 times and installing it. ok I would now eliminate KB924667 alone and test. im thinking of adding each one and test individually.

Install silently, F-Secure Client Security 9 with updated AntiVirus, spyware, spam, parental control definitions using fsdbupdate9.exe Useful to add to the WPI disc. Thanks to Loras for steps 1, 3 and 4. Updating the definitions can be done soon after silent install without a restart. Use the attached files to do silent install rightaway. if you use the attached files, skip steps 1 and 2. DOWNLOAD F-Secure CS 9 from here Step1 : Run Setup manually and stop when window with components appear. Go to "%userprofile%/local settings/temp/fssetup0000001" or ur temp directory and copy the file product.ini to any location. Then continue and finish the installation (to extract admin.pub). Step 2: Again the admin.pub error("error while using the key in admin.pub") persists (since v5 as far as i know) in this version too after silent install. so manual install is needed to extract the admin.pub file. After manual installation is over, copy the file admin.pub from %programfiles%\f-secure\common to any location. Step3 : download fsdbupdate9.exe and save it in any location. fsdbupdate9 contains all databases, i.e. AV, Spyware, Spam, Parental, etc. Step4 : Now extract the fsecure installation file to a location and open prodsett.ini and do the following changes and save: [F-Secure common] SetupMode=2 CD-Key=xxxx-xxxx-xxxx-xxxx-xxxx[i][b](put there your CD key)[/b][/i] SourceMediaPath=\ ProductInformationIni=product.ini [i][b][u]check for these two entries and add or replace in All the listed or newly added sections:[/u][/b][/i] SilentMode=1 (replace 0 with 1 in all entries) Debug=0 (replace 1 with 0 in all entries) [u][b][i]If this section is not present, add this section, otherwise change accordingly:[/i][/b][/u] [Silent Setup] DestinationDirUnderProgramFiles=F-Secure Reboot=3 SilentModePluginsLang=ENG [GUI] ; Dlg...Off = 0 | 1 | 2 ; where: 0 - always display ; 1 - display in custom mode, skip in typical mode ; 2 - always hide. DlgWelcomeOff = 1 DlgLicenseOff = 1 DlgKeycodeOff = 1 DlgUserModeOff = 1 DlgSelectComponentsOff = 1 DlgSelectPathOff = 1 Step5 : Now add the files admin.pub, product.ini and fsdbupdate9.exe to the extracted location. Step6 : use the following commands to install f-secure cs 9. %CDROM%\FSecureCS\setup.exe -s %CDROM%\pause60.cmd xcopy "%CDROM%\FSecureCS\admin.pub" "%PROGRAMFILES%\F-Secure\common" /S /Y %CDROM%\FSecureCS\fsdbupdate9.exe -f Thats it. F-Secure CS 9 is installed with updates. restart the computer now. admin.pub_and_product.ini.rar

i followed the MOONLION way and it installed in my computer with no problems. my previous method was also not giving prob in my computer but in other ones, it showed the '3dmenueffects.dll' error. so i would try with other computers too. everytime after restart, i get an error msg that 'outlook express cannot be started....blah blah'. this msg came with my previous methods too.

thanks for the idea. i would try it in a day.

i got the same problem and i removed the entries with orca. installation terminates in the middle saying it cant find the proper modules. i wanted to know which entry i have to remove with orca. i have removed all occuring entries of "Nero3dmenueffects.dll"

what kind of good forum u need? to learn cooking or driving or what? do u want to learn to create customised windows distribution? or wanted to learn how to use internet? i dont understand a thing.

i get this problem during install if i ignore that error. Error : The signature for windows setup is invalid. The error code is 57. The parameter is incorrect. Fatal Error : Setup failed to install the product catalogs. This is a fatal error.The setup log files should contain more information. so for now im skipping ie7 till i get a solution.

thanks . i would try that again.

when i nlite ie7 to win2003 sp2RC, it says this error. This hotfix isnt made for this windows version. Skipping <w2k3share root>\xmllitesetup.exe is this ok or will it give problem after installation. im asking this becoz i already tried ie7 as last option through runonceex with "/quiet /update-no /forcerestart" and still runonceex is not executing from then on.

perfect keylogger already classified as spyware with almost all antivirus. i cant find a way to shadow install it. anyway as far as i have seen it is the only software which can do a remote install and searching for better ones which can hide itself from antivirus and do remote install. if u come to know abt that, kindly post it. i too need it for a purpose. a person working in our company has stolen thousands of clients email id and started his own company and we are already loosing existing clients to him.

you can use the following line in a cmd file and use the %cdrom% variable to access the cd drive. Here Appz.CD is an empty file which has to be present in the cd root to identify the drive letter where the cd is present. u can use ur own file anyway. FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\Appz.CD SET CDROM=%%i:

even if ie7 installed through RunOnceEx, RunOnceEx is breaking after restart.

this utility is working but increasing the source size by 40mb+. i was previously using RunOnceEx to install wmp11. As im adding so many files to the source like wp, sounds, cursors etc, my source exceeds 750mb if i use this integrator so i have to use my old method. good effort anyway for a distribution with no extras.

glad it worked. Incorrect function error always refers that either drive cant read properly or cd has incorrect format.

try with another cd drive. old drives are problematic sometimes. ive got similar problem couple of times before.

this is my config.js containing the actual apps path and switches which has to be put in WPIScripts dir. downlaod these appz, and put them in appropriate dirs. config.js

i can give this idea to install using RunOnceEx. but after ie7 installed ,RunOnceEx is not working. someone has given a solution for this. http://www.msfn.org/board/index.php?showtopic=86142 Also nlite method works for me.

this would not work out if u use the files from the distribution cd. first install xp and do all kind of updates and take the required files from xp dir in ur hdd and do the modifications, modifype them and makecab, replace the files in the xp distribution with these modified files. this way i have made it work before.

the one which came with WPI5.5. the problem comes when installing office2003, ie installing word, excel, pp,access individually from wpi. i mean by selecting each one from wpi and not just the whole office CD. so what it does is install word first and then checks for cd label and then installs excel etc. so before installing each component, it checks for cd label. since its the same office2003 cd from which selected compnents has to be installed, the installation must go on. but what happens is after installing word, wpi shows debug error. the next line to be executed is cdswitch, before installing the next selected office component(excel or access or pp). just now i tested with other apps in WPI by inserting cdswitch command in them. it works well. so i found out there is not prob with cdswitch. may be with installation of office files. sorry for the inconvinence. i posted that coz i was trying various ways for past one day, but was testing using office portion. thanks very much. Just now i found that it was due to the fact that office cd was present instead of WPI cd. Everytime WPI finishes installating a software, it is looking for installer.hta in WPI cd. so i just used cdswitch.exe after each software installation if that software is present in other than WPI cd.

my wishes nanaki. glad to be in touch with u after long time. ur program works great all times but in WPI, if i use cdswitch.exe to check for cd which is already there in the drive, WPI gives me debug error and WPI gets hanged and i have to use ctrl+alt+del to kill it. Also the cdswitch.exe "request" screen itself is not showing. i wanted to know is there any way for cdswitch to simply exit and returns to WPI normally, if the required cd is already in the drive. i remember that when cdswitch is executed directly in my cmd files, it didnt give me problem like this, but im not sure.

use this switch in RunOnceEx.cmd : "IE7.exe /quiet /update-no /norestart". it worked for me. if i install ie7 through svcpack.inf, other hotfixes are not getting installed. after RunOnceEx.cmd executes fully, restart and apply the attached reg file(which i got from this site and edited) for some tweaks. ie7.reg Windows Registry Editor Version 5.00 ; add search MS Knowledgebase by KB number (just type the number in the search box) [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes\MSKBnumber] "DisplayName"="MS KB number" "URL"="http://support.microsoft.com/?kbid={SearchTerms}" ;add search MS knowledgebase by string (type the string in the search box) [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes\MSKBString] "DisplayName"="MS KB String" "URL"="http://support.microsoft.com/search/default.aspx?query={SearchTerms}" ;search using Dogpile [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes\Dogpile] "DisplayName"="Dogpile" "URL"="http://www.dogpile.com/info.dogpl/search/web/{SearchTerms}" ;Set ConTEXT as HTML editor in Firefox [HKEY_CLASSES_ROOT\FirefoxHTML\shell\edit\command] @="C:\\Program Files\\ConTEXT\\ConTEXT.exe \"%1\"" ;Set ConTEXT as HTML editor in Firefox [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\FirefoxHTML\shell\edit\command] @="C:\\Program Files\\ConTEXT\\ConTEXT.exe \"%1\"" ;Set ConTEXT as HTML Default Editor [HKEY_CURRENT_USER\Software\Microsoft\Shared\HTML\Default Editor\shell\edit\command] @="C:\\Program Files\\ConTEXT\\ConTEXT.exe \"%1\"" ;Set ConTEXT as HTML editor in Internet Explorer [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Default HTML Editor] "Description"="ConTEXT Programmers Editor" ;Set ConTEXT as HTML editor in Internet Explorer [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Default HTML Editor\shell\edit\command] @="C:\\Program Files\\ConTEXT\\ConTEXT.exe \"%1\"" ;Turn On Popup Blocker [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\New Windows] "PopupMgr"="yes" ;Make Google DEfault Search Engine [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes] "DefaultScope"="{A5816146-54D7-4DEF-B045-53B0E67878FD}" ;Phishing Filter Automatic [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PhishingFilter] "Enabled"=dword:00000002 ; Export your own Key here as it may be different ;[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections] ;"SavedLegacySettings& quot;=hex:3c,00,00,00,c4,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,04,00,00,00,00,00, ;00,00,a0,7b,ae,ef,9e,48,c6,01,01,00,00,00,02,00,00,00,c0,a8,01,66,00,00,00,00,00,00,00,00,6f,00,6f, 0 ;0,74,00,25,00,5c,00,54,00,45,00,4d,00,50,00,00,00,44,00,3b,00,2e,00,56,00,42,00,53,00,3b,00,2e,00,5 6 ;,00,42,00,45,00,3b,00,2e,00,4a,00,53,00,3b,00,2e,00,4a,00,53,00,45,00,3b,00,2e,00,57,00,53,00,46,00 , ;3b,00,2e,00,57,00,53,00,48,00,00,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,57,00,62,00,65, 0 ;0,6d,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, ;Add MSFN Forums as a Secondary Home Page [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main] "Secondary Start Pages& quot;=hex(7):68,74,74,70,3a,2f,2f,77,77,77,2e,6d,73,66,6e,2e,6f,72,67,2f,62,6f,61,72,64,2f,69,6e,64, 65,78,2e,70,68,70,3f,00,00, ------------------------------------------------------------------------------------------------------------------- My RunOnceEx.cmd cmdow @ /HID @echo off FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\XP_SP2.CD SET CDROM=%%i: SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY%\0003 /VE /D "Security Issue - KB900725" /f REG ADD %KEY%\0003 /V 1 /D "%CDROM%\$OEM$\Appz\KB\WindowsXP-KB900725-x86-ENU.exe /q /n /z" /f REG ADD %KEY%\0003 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0005 /VE /D "Security issue in the way ART images are handled - KB918439" /f REG ADD %KEY%\0005 /V 1 /D "%CDROM%\$OEM$\Appz\KB\WindowsXP-KB918439-x86-ENU.exe /q /n /z" /f REG ADD %KEY%\0005 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0006 /VE /D "Installing Windows Update Agent2.0 V6" /f REG ADD %KEY%\0006 /V 1 /D "%CDROM%\$OEM$\Appz\KB\WindowsUpdateAgent20-x86.exe /wuforce /quiet /norestart" /f REG ADD %KEY%\0006 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0007 /VE /D "Installing Windows Genuine Advantage Validation Tool KB892130" /f REG ADD %KEY%\0007 /V 1 /D "%CDROM%\$OEM$\Appz\KB\WGAValidationTool-892130\update\update.exe /quiet /norestart" /f REG ADD %KEY%\0007 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0008 /VE /D "KB913433 - Vulnerabilities in Macromedia Flash Player from Adobe" /f REG ADD %KEY%\0008 /V 1 /D "%CDROM%\$OEM$\Appz\KB\Windows-KB913433-x86-ENU.exe /Q:A /R:N" /f REG ADD %KEY%\0008 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0009 /VE /D "KB914440 - Network Diagnostic Tool v10" /f REG ADD %KEY%\0009 /V 1 /D "%CDROM%\$OEM$\Appz\KB\WindowsXP-KB914440-v10-x86-ENU.exe /q /n /z" /f REG ADD %KEY%\0009 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0010 /VE /D "Installing Windows Media Player 11" /f REG ADD %KEY%\0010 /V 1 /D "%CDROM%\$OEM$\Appz\01_wmp11-windowsxp-x86.exe /Q" /f REG ADD %KEY%\0010 /V 2 /D "%CDROM%\$OEM$\Appz\pause.cmd" /f REG ADD %KEY%\0011 /VE /D "Internet Explorer 7" /f REG ADD %KEY%\0011 /V 1 /D "%CDROM%\$OEM$\Appz\03_IE7.exe /quiet /update-no /norestart" /f REG ADD %KEY%\0012 /VE /D "Modifying Clock..." /f REG ADD %KEY%\0012 /V 1 /D "%CDROM%\$OEM$\Appz\02_LC162b.exe /S" /f REG ADD %KEY%\0013 /VE /D "Applying Glass..." /f REG ADD %KEY%\0013 /V 1 /D "REGEDIT /S %CDROM%\$OEM$\Appz\Glass2k.reg" /f REG ADD %KEY%\0014 /VE /D "Correcting Backgrounds..." /f REG ADD %KEY%\0014 /V 1 /D "REGEDIT /S %CDROM%\$OEM$\REGTW\BG_Tweaks.reg" /f REG ADD %KEY%\0015 /VE /D "Adding My Cursors..." /f REG ADD %KEY%\0015 /V 1 /D "RunDll32.exe setupapi,InstallHinfSection DefaultInstall 132 %Systemroot%\Resources\Themes\MyBlueGlass\Install.inf" /f REG ADD %KEY%\0019 /VE /D "This one executed in the next restart..." /f REG ADD %KEY%\0019 /V 1 /D "%CDROM%\$OEM$\Appz\Run_SAC.cmd" /f REG ADD %KEY%\0020 /VE /D "Restarting..." /f REG ADD %KEY%\0020 /V 1 /D "shutdown.exe -r -f -t 60 -c \"User settings are not yet created by windows unless this user is fully logged in. Hope it is created during this countdown. System has to be restarted after this countdown in order to apply some settings for this user...\"" /f EXIT ----------------------------------------------------------------------------------------- Run_SAC.cmd cmdow @ /HID @echo off FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\XP_SP2.CD SET CDROM=%%i: SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY%\0001 /VE /D "QuickLaunch, Shortcuts, Cleanup" /f REG ADD %KEY%\0001 /V 1 /D "%CDROM%\$OEM$\Appz\SAC.cmd" /f EXIT ----------------------------------------------------------------------------------------- SAC.cmd cmdow @ /HID @echo off FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\XP_SP2.CD SET CDROM=%%i: copy /Y "%CDROM%\$OEM$\Appz\Show Desktop.scf" "%USERPROFILE%\Application Data\Microsoft\Internet Explorer\Quick Launch" xxmklink "%USERPROFILE%\Application Data\Microsoft\Internet Explorer\Quick Launch\Windows Media Player 11" "%PROGRAMFILES%\Windows Media Player\wmplayer.exe" xxmklink "%USERPROFILE%\Application Data\Microsoft\Internet Explorer\Quick Launch\Windows Explorer" "%systemroot%\explorer.exe" REN "%UserProfile%\Application Data\Microsoft\Internet Explorer\Quick Launch\Launch Internet Explorer Browser" "%UserProfile%\Application Data\Microsoft\Internet Explorer\Quick Launch\Launch Internet Explorer Browser.lnk" REN "%UserProfile%\Start Menu\Programs\Internet Explorer" "%UserProfile%\Start Menu\Programs\Internet Explorer.lnk" REN "%UserProfile%\Application Data\Microsoft\Internet Explorer\Quick Launch\Launch Internet Explorer Browser" "Launch Internet Explorer Browser.lnk" REN "%UserProfile%\Start Menu\Programs\Internet Explorer" "Internet Explorer.lnk" REGEDIT /S %CDROM%\$OEM$\Appz\03_ie7.reg --------------------------------------------------------------------------------------------------------------------

try using bmp file instead of jpg. also after first restart, reapply background setting registry. this is how i got it work.

when windows reboots first time, before first logon, xp stays still at the screen where it shows the boot logo and "please wait..." below that. after morethan 1/2 hr, i just rebooted and it works fine and nothing is missed. i dont know abt the hang error. i use ie7beta3 integration. nlited 2 separate distributions and tested to get the same result. nlite1.0 with ie7beta2 gave me no probs.