UrcelPower

hello, thanks for your offer, but my 2.88Mb image works now fine The things i did - i copied all the files (+ hidden files) in the 2.88Mb image - that's real important, the other thing is change the attributes And it work's Here my autexec.bat: CLS @ECHO Off PROMPT $P$G mscdex.exe /d:cd001 /l:h /m:16 mouse.com PQMAGIC /NSS /PQB=C:\windows\temp reboot.com ... and the config.sys: InstallHigh=keyb2.com > NUL Files=10 Buffers=10 Dos=high,umb Stacks=9,256 Device=oakcdrom.sys /d:cd001 > NUL LastDrive=z Greetz to all

Thanks, but i know this guide from flyakite's - Page, it's not perfect and not complete. I think, i found the explanation, why it was a problem to start pm7/8 out from an image on a cd/dvd. There are two things: 1.) Clear in all hdd the mbr (Fault 91 .. disk-manager will be found...) this you must clear with: "fdisk /cmbr 1" and than "fdisk /mbr" >> It's important that you save before you start all data << 2.) Use in the "autoexec.bat" from pm7/8 this switches "/NSS /PQB=C:\windows\temp" ... and than the application will work !!!

Yes, that's right I have a hard time now with the application .. But, where can i download the All-In-One Norton CD too ? Or did you know where can i get a ready and working bootable image from PM ?

OK That's fine for you - but why did you can't tell me, step by step, you know (see first TOPIC) what did you done ? Because Of me, use a good example with cd shell ! That would be possible ?

Hey BrandonS_Mil, did you change something at the autoexec or the config or put some other needed files in the 2.88 image ? He to all - i'm searching now a long time here in the forum and i find out, a lot of people did have the same problem with this Partition Magic for creating a 2.88MB working Image. I THINK, THE REALITY IS, NO ONE DID HAVE A WORKING PM-2.88-DISK-IMAGE The BCDW is not the newest for creating a multiboot-cd, so i was the meaning a lot of people, send me answers with instructions - perhaps with some pictures .. In hope of an solution

Yeah, I just do it

Hey, i do what you suggest me, but no good result - it must be a bootable disk ... ok, so i do it at this way: 1.) I take disk1 from pm7 and let read winimage 2.) 2.88 Image-Size 3.) Injected a directory - in that one, i put the second disk .... but it will not work, grumml :-( Please can you write me, a step by step doing for dummies ?!

Hey, i hope does anybody can help me I try now since a few weeks to get the dam partitionmagic 7 to include into the "Bootable CD Wizard" but what i do all the time when i start the bcdw and than i choise pm7 it comes from the pm: critical error, internal error or some codenumbers etc. please help me for including that application !??!? Remark: The PM7 is a legally version - but it's only a version for install and create 2 dos-boot-disks. OK i'm on the end greetz and thanx