Jump to content

hatred

Member
  • Posts

    41
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Canada

Everything posted by hatred

  1. Hmmm Should Of Known Id Get Some Smart a** Reply Back. wouldint Expect Anything Else From You . Ill Figure It Out Myself. I Wont Bother Posting Here Again. Cant Be Bothered With Your Flaming Crap In Here. I have Better Things To Do Then To Mark Someone On The way They Type
  2. I Put On Norton Antivirus Its Fine Does Not Check The Floppy On start Up Its The Firewalls That are doing It Whitch I Dont Understand One Bit. Since when Does Sygate Firewall Check A Floppy Drive At Startup ?? THis Dont Make Any Sence What So Ever .. If something Was going To Be Checking The Floppy It Be antivirus In most Cases antivirus Is not Giveing Me A Problem Its The firewalls That are try to search The Floppy A: On Startup. I Can Use Symantec Antivirus By Itself Not One Problem I Can Uninstall it and Still No Problem But Soon As I Put sygate Firewall On. Keeps Checking That floppy On Boot Up client Security Will Do This Aswell. I tryed Asking Acouple computer Tecs To See If they New .. They Dont UnderStand Why Its doing That With just Those 2 Programs And Not Anything Else. I Used to Beble to Run Them Fine ... Ive Looked In The Bios Aswell Nothing Wrong There searched It Lots On Google tryed Everything Even Deleteing MRU's The Program Creates Still No Go .. Im puzzled On This One
  3. when i install xp off cd and it first boots into windows the first time i hear the floppy drive load. on next reboot its fine and the ones after. BUT if i install either symantec security or sygate when windows loads it keeps trying to search the floppy drive and hangs me up for about 7 seconds before the taskbar will load even if i disable the floppy drive i still get this hang up .. if i remove symantec client security or sygate. this problem goes away ive tryed zonealarm its the only firewall that wont look for a floppy or hang me up on windows startup. ive searched everywhere and tryed everything to fix this annoying problem .. but i just dont know whats causeing it .. i was able to run they's products before with no problems at all i haveint changed any drivers or anything hardware related at all. only thing ive changed was my winnt.sif and that was just the UnattendMode=DefaultHide Instead Of FULL. Hope Someone Can help
  4. Ive Modded The sfcfiles.dll For A Couple Programs I Didint Want It To moniter. I have It working great but After Installation I Go To Event Viewer Theres A none fatal error .. Windows Complains About It Not Being Properly assigned even though I Ran Modifype On The Dll And Recompressed It To Cab. Any Suggestions On what I could Be Doing Wrong ? Thanks
  5. Thanks Man I used your Command but Instead I Used addreg=services.dis Then Put REG_DWORD%, %DIS% And Under string The Same Hoped to god It worked . Since The Last time I Didint Have the syntax right I got A blue screen And A harsh reboot LoL but anyways It Worked. so instead Of DIS I could just Use The addreg= Services.disabled %REG_DWORD%, %Disabled% Then For string Add the disabled To that With The value. thanks! your wAy is much Better then I Was Useing Looks More Pro Like To. Im tRying To Really Get into the whole Inf thing since I know LOngHorn will Be useing This. One Quick Question where do you Find tHe syntax For Addreg= like to Add services.Auto Ect.. Ive searched MS site And They dont give You The Description On It . Like say I wanted to Add Tweak To Lets say Advanced In the HKLM Instead Of Typeing The Whole String Out Could you use like Addreg=Advanced instead Of HKLM ? and Then Use It In your method You should Me? And Have the String = software/CurrentVersion\Explorer\Advanced REG_DWORD = 0x00010001,4 "Example"
  6. sleepnmojo Your inf You Showed Me whats the "Start", %REG_DWORD%, %AUTO% Part Of Your Inf What would You Change The AUTO To If Used To Disable A service. for Short term As You used AUTO Stupid Question But Guessing Before On another Inf made Me have to format Ive wrote A big One But In A different way but i like your Way Better. if You have Any Other Methods For shutting Down services Feel free To Post them. I like to Try Different commands out
  7. Nah Its Ok I understand why they Were Getting Pushy With Me . sorry Alanoll I Know You were Just Trying To Help Me Out . Ok To Anwser Your Question My Cd Is The Official Release With The sp2 From microsoft It wasint slipstreamed By Anyone. Now I tryed getting Info On google About This Problem not Much Luck. Anyway I Went to gosh's site And Did His slimming Down version Of XP useing The hexWorkshop I formatted Installed When i ran windocter To See If It would pick up tHis dotnet. It was gone! Great News sorta ... bad thing Is When you install diskeeper Or norton Antivirus It Puts The bloody thing Back In. Soooo Ya kinda No Point In Trying to have windows Not install it LoL I must Say though 15 Minites My XP was Installed I was Impressed
  8. Where are They Comeing From Then ?? I mean I Do A Full install Of Xp With nothing Added To My windows .. I do not Install my Graphic drivers for my card Just Use The default Xp Puts In. My Cd contains CMPNENTS DOCS DOTNETFX I386 SUPPORT VALUEADD AUTORUN.INF README.HTM READMESP.HTM SETUP.EXE SETUPXP.HTM WIN51 WIN51IP WIN51IP.SP1 And WIN51IP.SP2 I have no Printer Cams Ect. To tHis Pc Alanoll I dont Use Catalyst drivers If Your Refering to ATI I use Geforce 5200 from ASUS The cheap Card LoL
  9. I Know It Doesint Say Anything About installShields files.. but It does State that InstallShield installs DotNetInstaller.exe as sleepnmojo replyed if you want to know what is installing the files, look at the list of files you are installing. Find out which one uses the installshield installer, and that is your most likely culprit. what Is what I Dont Know And Is why I was Asking For Help In this thread Topic. I Dont spend All Day Ripping XP Apart . I Dont Know the files Or Components to Xp.. Sorry
  10. http://consumer.installshield.com/kb.asp?id=Q108178 RyanVM Check that Out . Another Thing Im not adding Nothing To The Cd Or Any drivers. just A full Install Xp Pro With Sp2 Intergrate BY MS Ive Installed this On Other computers With the same Affect stated In The Link.
  11. Yes You did Tell Me I could delete The Dotnet folder YOU Also Told Me that Windows Does Not copy/Install They's Files Onto The drive My Above Post Proves That They's File Are Put to tHe drive durring Installation and You Ask Me why I aSked You 3 Times ? You Were Incorrect Is Why. Oh And BTW I wAsint Refering To THe YES I Was Refering to YOu Talking To Me Like Im Some Stupid id*** When You were THe One that was wrong To Begin With On tHis Subject Maybe You should Read my Above Post I Think It flew Right Past You. "InstallShield installs DotNetInstaller.exe as part of its engine files"
  12. All I Needed To Know .. Thanks .. Dont Worry I Want Ask How since some People Here Like to Talk To Others Like There STUPID! ill Figure It Out Myself
  13. did you not understand????? IT'S NOT COMING FROM WINDOWS SETUP AT ALL! IT'S ONE OF YOUR PROGRAMS THAT'S ADDING IT! Perhaps it's coming from some DRIVER you have installing, perhaps even the ATI driver set including the Catalyst Control Center... <{POST_SNAPBACK}> You received this error message after running a diagnostic scan using antivirus software, such as Norton AntiVirus or Norton WinDoctor. Some diagnostic software recognizes DotNetInstaller.exe as a .NET application that depends on the .NET Framework and reports it. DotNetInstaller.exe is a .NET application that is used when an installation is installing .NET assemblies. InstallShield installs DotNetInstaller.exe as part of its engine files. DotNetInstaller.exe does not work on systems that do not have the .NET Framework, but the file is cached with the InstallShield engine files just in case it is needed in the future when the .NET Framework is installed. It is technically correct, but InstallShield always checks for the Framework before trying to
  14. Ah Ok thanks For the Info Im Not Going to Bother removeing The The Folder And Ya Im Running normal Windows xp pro . One Last question .If The dotnet installer.exe Whitch is in The Directory I mentioned In My Above Post Isint being installed/copyed from the dotnetfx folder On my Cd. what Exactly Adds This ?? The Sp2 Or Just General Windows Installation ?? thanks For your Help
  15. Ya I know that NET Framework is in the dotnetfx folder On my Cd .which Is Installing It Into my Windows Durring Installation. Thats what I Dont Want . Thats why I asked If I can Remove The dotnetfx Folder From The XP CD Dir Without Any Errors during Setup . Or Some Way Of Telling It Not to install. DotNetInstaller.exe gets Put In your program Files/Commonfiles\InstallShield/ProfessionalRunTime/09 In There Will Be 2 Folders a 00 and a 01 with intel32 inside go into that folder you'll see DotNetInstaller.exe With A bunch Of Dll's This Is what I Dont want windows To install/copy To my Drive
  16. Its On The Xp Cd. folders DotNetFX Ive Got Most Of It Out Useing netfx In The winnt.sif But dotnet Is Still in tHere. now If There was An Inf File That Installs This dotnet Piece. I could Get rid Of It .. just dont Know whitch Inf Its In.. Or I was Thinking About Removeing The Intire folder from The Xp Cd. I Dont tHink id get any Errors Doing So.. could someone Confirm This ?
  17. Ok . Was Just wondering About the modifype Cause When I use It. It Allways says No Errors Have A Nice Day. Kinda thought It Would Give You some Indication That It Fixed the Dll
  18. DotNetInstaller.exe It gets Put In By Default Under Program Files\Common files\ install shield It Wants framework Installed Or It complains About mscoree.dll. Thats what I wAnt gone When Installing. I Removed Netfx Thought That Do The Trick But It Didint Get Rid Of That dotnet.
  19. Ya Im looking For A Way to get Rid Of Dotnet So It doesint Install During Setup Ive searched This forum And could not Find Anything. Is There Anyway To Do this threw Unattended Or Editing An Inf file ?
  20. Does modifype actully Work ?? I Mean ive Copyed The winntbbu.dll Out Of The i386 Folder Ive Changed the The BMP In it Saved It Ran modifype On The Dll It Comes Back Saying No Error occurred, have a nice day. Ive Just Modded the file ... Wouldint There Be something To Fix?
  21. Oh you Did Help Me though . I know Messenger Is Default Value 4 When windows Sets It Up What I Was Doing Was just trying To Turn It On With An inf file And It wasint working. I Was Trying to Get It To Turn On so I new I had The right Command Because I want To use it In A preinstall And If it aint Turning A services On And Off For me By Installing It .. Its not going To work When Installing My Windows. Sorry For Not Explaining more Better On what I was trying To Do.
  22. Thanks For The Reply sleepnmojo. Ok This Is what Ive Done And It Works Finally!!! I Put Version] Signature=$Windows NT$ [DefaultInstall] AddReg=Services [services] HKLM,"SYSTEM\CurrentControlSet\Services\Messenger","Start",0x00010001,2 And I right Clicked Installed Rebooted And got It To Work So I Tryed Makeing A bat file I put It In The Same folder As My Inf. In that Bat The Command Was rundll32 setupapi,InstallHinfSection DefaultInstall 128 .\mytweak.inf Ran That Bat And It fired Up The inf No Prob So Now that I Know That Its working Im Makeing The $OEM$ folder And Adding That To My Cmdlines.txt .Sooo Used To Registry This Whole Inf Throws me off.. Anyways Thanks For Your Help
×
×
  • Create New...