mogas

Done and done, sadly no difference . The fun thing is: i had a fresh install due to the addition of the SSD to the system. Before that hibernate has always worked.

The trace was actually made after i did that. I also installed some of the hotfixes (not the one regarding to the large disks, both disks in the system are 500GB). I also did a defrag with consolidating free space, after i removed the hiberfile. Then i activated hibernate again, to no avail...

First of all i'd like to give my compliments to MagicAndre, you've helped a lot of people here Anyway: i've been experiencing some weird issue during resume from hibernation, my hiberread times are over 700 seconds. I made a trace summary (https://www.dropbox.com/s/6sfhjv0g2qe3hew/summary_hibernate.xml?dl=0) but i can't find any details from what happens while reading the hiberfile. Edit: boot is pretty quick by the way, nothing wrong with that. By the way: windows is an almost fresh install, i've had this issue since i installed it. The drive is a Samsung 840 Evo SSD, in an (a bit old) Dell Latitude E6510 laptop. When i look at my HD led it blinks slowly during a minute or 6, and after that it suddenly starts lighting up (in the same fashion as it does when writing the hiberfile), and after about 20 seconds i've got the login screen in front of me. So right now i'm trying to figure out what happens during the hiberread process. Here's the trace itself by the way: https://www.dropbox.com/s/0e24p8k3s6w5dio/hibernate_BASE%2BCSWITCH%2BDRIVERS%2BPOWER_1.7z?dl=0