Saecrious

@Obliviator: Thanks for the guide! It works wonderfully.

I've tried this method to get the RAID controller working in my Sager 9860 notebook, which is a Promise 378. I was able to get everything put onto the CD without issue, and it loads fine in VirtualPC... but loading on the laptop itself it acts like there's no MSD loaded at all ("Setup did not find any hard disk drives installed on your computer"). This is my first time integrating an MSD, so I may have done something wrong. Contents of the created folders: [code]E:\CD_Root\$OEM$\TEXTMODE>dir /b fasttx2k Fasttx2k.cat fasttx2k.INF fasttx2k.sys ptipbmf.dll txtsetup.oem E:\CD_Root\$OEM$\$$\OemDir>dir /b ptipbmf.dll E:\CD_Root\I386\$OEM$>dir /b fasttx2k Fasttx2k.cat fasttx2k.INF fasttx2k.sys ptipbmf.dll txtsetup.oem[/code] The txtsetup.oem file: [code][Disks] d1 = "Promise FastTrak 376/378 Driver Diskette", \fasttx2k, \ [Defaults] scsi = FastTrak_TX2K_xp [scsi] FastTrak_TX2K_xp = "WinXP Promise FastTrak 376/378 (tm) Controller", fasttx2k [Files.scsi.FastTrak_TX2K_xp] driver = d1, fasttx2k.sys, fasttx2k inf    = d1, ptipbmf.dll inf    = d1, fasttx2k.inf catalog= d1, fasttx2k.cat [HardwareIds.scsi.FastTrak_TX2K_xp] id="PCI\VEN_105A&DEV_3376", "fasttx2k" id="PCI\VEN_105A&DEV_3373", "fasttx2k" [Config.fasttx2k] value = "", Tag, REG_DWORD, 1[/code] And my WINNT.SIF file: [code];SetupMgrTag [Data]    AutoPartition=0    MsDosInitiated="0"    UnattendedInstall="Yes" [UserData]    ComputerName=calico [Unattended]    UnattendMode=DefaultHide    OemPreinstall=No    TargetPath=\WINDOWS [GuiUnattended]    OEMSkipRegional=1    TimeZone=20 [TapiLocation]    AreaCode=501 [Identification]    JoinWorkgroup=BOREALIS [Networking]    InstallDefaultComponents=Yes [Components]    iis_common=On    iis_inetmgr=On    iis_ftp=Off    iis_www=On    iis_www_vdir_printers=Off    iis_www_vdir_terminalservices=Off    iis_smtp=Off    iis_smtp_docs=Off    iis_nntp=Off    iis_nntp_docs=Off    iisdbg=Off    indexsrv_system=Off    msnexplr=Off    netoc=Off    zonegames=Off     [MassStorageDrivers]    "WinXP Promise FastTrak 376/378 (tm) Controller" = "OEM"    "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"     [OEMBootFiles]    txtsetup.oem    fasttx2k    fasttx2k.inf    fasttx2k.cat    fasttx2k.sys    ptipbmf.dll[/code] Any suggestions? I also have an LSI 21320-R driver I want to tackle next if we can get these working.