Tacio

Oh.. it so complex... may be I can give more information about this crash and you can say more about how resolve this problem?

May be this wrong forum, but anyway... I have programm MeGUI for dvd ripping and some time ago it's shows error while openning avs files. So I record drwatson.log file with this error and may be anybody can parse this log, because I haven't experience in debugging. This is the error: drwtsn32.7z

Clint, sorry, but you don't understand me because of my bad english On Terminal Server using regedit I change port from 3389 to 80 and now incoming RDP sessions listening on port 80, ok. How can I configure computer that want to connect to this Terminal Server using RDP so that outgoing port was 80 too and not 10xx by default, because my proxy allow only connection to 21 or 80 ports.

N1K, sorry, but you don't understand me because of my bad english On Terminal Server using regedit I change port from 3389 to 80 and now incoming RDP sessions listening on port 80, ok. How can I configure computer that want to connect to this Terminal Server using RDP so that outgoing port was 80 too and not 10xx by default, because my proxy allow only connection to 21 or 80 ports.

I change listening port on remote computer, but how can i change outgoing port on my local computer? I want that outgoing port was 80 and not 10xx because on proxy open only 80 and 21 ports.

I cann't do this because network admin denied all connection from all other ports exept 80 and 21. But I configure my computer in network1 that it listening rdp connection on port 80. So, how I configure my computer in network2 that it connect from port 80 to my computer in network1?

There is two local area networks, connected with each other through 100Mbit cable. I have one by one my computers in these networks. Network1 have router with open all ports, network2 have proxy with 21 and 80 open ports. So, how can i take full access to my computer in network1 from my computer in network2?

But this very good chipset and it's one of the most commonly used. In 3com site I didn't find drivers for my nic. I'm afraid that microsoft refuse to support this nic.

I very surprised when I install winxp x 64 and seen that my nic 3com 905TX not recognized. May be anybody have drivers for this card?

Ivanov, where can i find programm that show cpu speed in your wallpaper?

or may be somebody knows similar network simulator?

Who works with program Comnet III (network simulation )? I have some questions about it.

I have miranda internet pager v. 0.4 and weather plugin for it v. 0.3.5.0 I connect to icq server through proxy(SOCKS5), but weather plugin don't want work through this proxy.

What i do: i have winnt.sif ;SetupMgrTag [Data] AutoPartition=0 MsDosInitiated="0" UnattendedInstall="Yes" AutomaticUpdates=yes [Unattended] UnattendMode=DefaultHide OemSkipEula=Yes WaitForReboot="No" OemPreinstall=Yes Repartition=No AutoActivate=No UnattendSwitch="yes" [GuiUnattended] OEMSkipWelcome=1 EncryptedAdminPassword=NO OEMSkipRegional=0 TimeZone=145 [UserData] ProductID=*****-*****-*****-*****-***** FullName="" OrgName="" [Display] BitsPerPel=16 Xresolution=800 YResolution=600 Vrefresh=85 [TapiLocation] CountryCode=7 [RegionalSettings] LanguageGroup=5,1 SystemLocale=00000419 UserLocale=00000419 InputLocale=0409:00000409,0419:00000419 [Identification] JoinWorkgroup=POWERGROUP! [Networking] InstallDefaultComponents=Yes [GuiRunOnce] %systemdrive%\install\WPI.cmd i install windows with winnt32.exe: d:\i386\winnt32.exe /s:d:\i386 /unattend:d:\i386\winnt.sif but setup not start with error - "d:\i386\winnt.sif is not accessible or not right"

and another question... i want to install my unattend winxpsp2 on new hdd from windows, how does it looks winnt.sif?