How about WPI? Have a look here:

http://www.msfn.org/board/index.php?showforum=93

While playing a little with the shell in winxp64 I stumbled across a strange problem:

When I run the command

tasklist /FI "USERNAME eq %USERDOMAIN%\%USERNAME%" /FI "ImageName eq msiexec.exe"

On a WinXp 64 bit, I get the output

INFO: No tasks are running which match the specified criteria.

on a WinXP 32bit, I get

INFO: No tasks running with the specified criteria.

So nearly the same

But when I run the command

for /f "tokens=1" %i in ('tasklist /FI "USERNAME eq %USERDOMAIN%\%USERNAME%" /FI "ImageName eq msiexec.exe"') do echo anything

on a 64bit xp, I get the output:

D:\>echo anything
anything

on a 32bit xp, I get the output

INFO: No tasks running with the specified criteria.

So it seems, that on a 32bit xp the INFO message seems not to be in the stdout, but it is in 64bit xp.

Can anyone explain this to me?

Especially, does anyone know, where the message on a 32bit xp is redirected?

Does this method also work for SATA drivers?

I've just created an unattended 64 bit XP-CD and now want to integrate some SATA/RAID drivers.

I need to extracrt some printer drivers from the Windows XP 64 Bit installation CD to install these on a print server.

Anyone knows where these are located and how I can extract them?

For your ram, there's a programm called memtest32.

For harddisks you have to have a look on the manufacturer's homepage, but I don't think, that it's an hadrdisk error.

For CPU there are different stress tests, but it don't know a special program of this kind.

In such a case, I would suggest to use an AutoIT script.

Don't know a shortcut, but you could use the following AutoIT script

Run("control sysdm.cpl,,1 -1")
WinWaitActive("System Properties")
Send("!c")

Unfortunately it only runs on english versions.

Hi there,

I've got a strange problem on a computer. Every User has to logoff two times, till Windows does it. So when you click logoff first time nothing happens, when you click it another time, it logs off fine, even if the second logoff comes directly after the first one. Checking the task manager after clicking the first time doesn't show any process, which is very busy.

I really don't have a clue, what the problem could be.

Does anyone else has?

Any help would be appreciated.

Perhaps you're looking for the Universal Switch Finder?

http://www.msfn.org/board/index.php?showtopic=17940&st=0

Perhaps I missed the point, but does the Mstsc.exe work?

And by the way, normally the Remote Desktop Connection is located in Start -> Programs -> Accessoires -> !!!!!!Communication!!!! -> Remote Desktop Connection, not in System Tools

@doc How do you apply a regtweak when you can't go into gui mode?

@T D:Ok., you've got a point.

Do you have integrated additional SATA drivers? This problem occurs, if you don't have integrated the SATA drivers in a right way or if you try to add them from a disk while performing an unattended setup.

I suggest to disable the automatic restart, when a BSOD occurs, with the following regkey:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl]
"AutoReboot"=dword:00000000

For Firefox, I use the following batch to set a configuration script:

IF NOT exists "%PROGRAMFILES%\mozilla Firefox"\defaults\pref\firefox.js echo didnt find config.file && pause && exit
echo pref("network.proxy.autoconfig_url","http://www.mydomain.de/proxy.pl"  ); >> "%PROGRAMFILES%\mozilla firefox"\defaults\pref\firefox.js
echo pref("network.proxy.type",2); >> "%PROGRAMFILES%\mozilla firefox"\defaults\pref\firefox.js
exit

To make an adequate script, just make the settings in firefox and have a look, which lines are added to the prefs.js file.

Should be very similar for netscape, but we don't use it in the institute, I'm working in, anymore.

Didn't know the first one, really helps a lot.

Muchas gracias.

The method described in the manual is thought to be used with an unattended install of windows.

You also can run the wpi directly by executing the wpi.cmd. Just have to make a few changes, so that the wpidir is set correctly.

Have a try with these regtweaks:

Windows Registry Editor Version 5.00

;Enables the autologon for username without password 
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"DefaultUserName"="username"
"DefaultPassword"=""
"AutoAdminLogon"="1"

To make this clear: I don't want to have the normal autocompletion in XP for files and folders, but an adequate thing for the commands.

In the standard XP-installation this isn't contained or just not enabled, I don't know.

I'm wondering, if it is possible to activate autocompletion for commands like in linux. So for example I want to be able in command line type "xc + TAB" and then have it completed to xcopy.

Furthermore it would be nice to have a possibility to add some fixed path to autocompletion.

Anyone has an idea, if this is possible?

Thanks in advance.

for dotnet you can use the following command:

start "install dotnet 2.0" /wait c:\install\\dotnetfx.exe /q:a /c:\"install /l /q\"

Thanks to you both.

In use the net share command in a cmd-file to make a networkshare.

net share myshare=m:\

Problem is, that it has full access for all users.

Anyone knows, how to make it readonly ( I didn't find an appropriate switch) ?

Title edited -- Please, use [TAGS] in your topic's title.

Please follow XP Forum Rules from now on.

--Sonic

Why don't you use a logon script to connect the printers?

How about this one?

ECHO %systemroot:~0,3%

You're sure, that there exists no user called administrator? This account doesn't show up in the normal XP-logon screen.

Perhaps have a look with the Emergency Boot CD which you can find here:

http://ebcd.pcministry.com/

With this CD you also can reset the administrators password, in case you forgot it.

I've got an idea, what the problem could be.

At the stage when cmdlines.txt is run, the all users profile doesn't exist. Perhaps office needs this profile.

So to solve this problem, I would propose to run the installation through runonceex.cmd.

Hope this helps.