Hello. I am a "happy owner" of a 500 GB 7200.11 Seagate drive affected with the firmware issue, the BSY one and maybe the LBA0 too... After a intensive search I founded the way to fix my drive and recover all my info. But when I try the method I have a little problem: I do not obtain the prompt in hyperterminal. Let me explain what i've done: I have the rs232 to ttl converter powered by a molex from the PC at 5 Volts. I've tested it conecting rx and tx and typing in hyperterminal and works fine. Then, I remove completly the pcb from the HD and connect RX and TX wires to the TX and RX of the converter (shifting connections do nothing in hyperterminal). The next step is power the converter, open hyperterminal and configure it (38400,8,N,1,N) and power the HD board. The problem arrives now: I press CRTL+z but I do not get the prompt. The only thing that appears on hyperterminal screen are spaces and black squares. As I said previosly, changing the conections do nothing on screen. I've changed hyperterminal config as suggested in other post to "windows key" and the problem persists. What I'm doing incorrectly??? Thanks in advance and excuses for my bad english. PD: he estado siguiendo los posts de Pichi en el hilo en castellano hasta que lo cerraron. Si algun consejo fuera en castellano lo entendería mejor :blushing: