ghorvath

In the file I used only lowercase (at least iastor.sys was lowercased everywhere), and the filenames were lowercased as well. It did not work. When I changed the filenames to all uppercased it worked. That is all I know. Anyhow, it works for me now, so thanks for the help. ghorvath

Ok, I figured it out finally. The error is (of couse) pretty ridicolous.... When windows is in text mode, then it is case sensitive about the filenames.... So every filename hase to be UPPERCASED, otherwise the textmode installer will not find it. Thank you for the guide, if I encounter any other problems, I will post it. ghorvath

Hi! I did what you adviced, and the installer does not find the sys file, and the setup process halts. I put all driver files into the i386 directory, as you suggested, did not work. Then I did a makecab on the sys file, and added the resulting .sy_ file to the i386 directory. Then I removed the original files (.cat, .inf., .sys) and did a makecab on all of them (separately) and put all the resulting 5 files (with extensions (.ca_, .in_, .sy_) but it did not help. The 5 files are: iaahci.cat iaahci.inf iastor.cat iastor.inf iastor.sys I attached the txtsetup.oem file (as txtsetup.txt, since the uploader did not let me to upload the .oem file). Here is what I added to the dosnet.inf: (to the appropriate place) [Files] d1,iastor.sys Here is what I added to hivesft.inf: (To the appropriate place) HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion","DevicePath",0x00020002,"%SystemRoot%\inf;%SystemRoot%\intel\sata" Here is what I added to txtsetup.sif: (to the appropriate places) [WinntDirectories] 300 = intel\sata [sourceDisksFiles] iaahci.cat = 1,,,,,,,300,0,0 iaahci.inf = 1,,,,,,,300,0,0 iastor.cat = 1,,,,,,,300,0,0 iastor.inf = 1,,,,,,,300,0,0 iastor.sys = 1,,,,,,,300,0,0 iastor.sys = 100,,,,,,,4,0,0,,1,4 [HardwareIdsdatabase] PCI\VEN_8086&DEV_2922&CC_0106 = "iaStor" PCI\VEN_8086&DEV_282A&CC_0104 = "iaStor" PCI\VEN_8086&DEV_2829&CC_0106 = "iaStor" PCI\VEN_8086&DEV_2822&CC_0104 = "iaStor" PCI\VEN_8086&DEV_2821&CC_0106 = "iaStor" PCI\VEN_8086&DEV_2682&CC_0104 = "iaStor" PCI\VEN_8086&DEV_2681&CC_0106 = "iaStor" PCI\VEN_8086&DEV_27C3&CC_0104 = "iaStor" PCI\VEN_8086&DEV_27C6&CC_0104 = "iaStor" PCI\VEN_8086&DEV_27C1&CC_0106 = "iaStor" PCI\VEN_8086&DEV_27C5&CC_0106 = "iaStor" PCI\VEN_8086&DEV_2653&CC_0106 = "iaStor" [sCSI.Load] ... ... iaStor = iastor.sys,4 [sCSI] iaStor = "Intel® 82801GBM SATA AHCI Controller (Mobile ICH7M/DH)" My windows source is a hungarian original sp2 disc, I integrated the sp3 and some other hotfixes with the /integrate switch. Then I did the modifications mentioned in this thread. Can anyone help me what I did wrong? I do not want to create an unattended disc, I still want to have the F6 option at the beginning, but I do not have a floppy drive. Thanks for any help. ghorvath Txtsetup.txt