ari

You can found this links in the file C:\Windows\WindowsUpdate.log, if you have downloaded the files from the Win Update Site.

MS DL Page This is a optional Patch with WGA Check. Nobody can post a directlink to the *.exe. KB896422 is replace with KB917159 Both Patches install the File srv.sys, KB896422 Vers. 5.1.2600.2673 & KB917159 Vers. 5.1.2600.2893 from this file

I think, You can use /quiet /norestart for silent install

You can also Download the WGA Tool here http://aris-toolz.de/KB905474.html

Hi the_guy, that is correct. But if one installs the old Script Host 5.6 (Build 5.6.0.8825) after KB917344, the new is overwritten jscript.dll by the old jscript.dll. So that that does not happen, one would have to keep the installation sequence in svcpack.inf. Therefore it is to be installed better equal the new Script Host. cu Ari

New since yesterday: Windows ScriptHost 5.6 Build 5.6.0.8831 for Win XP & Win 2000. replace: Windows ScriptHost 5.6 Build 5.6.0.8825 from Sept 18 2004 and KB917344, ( MS06-023 ), from June 13 2006

Yes, the MS Win Update Site and MS Tool MS BSA detect the Flash Player 8. Both Patches replace the File Flash.ocx. Because of this the Macromedia Flash Player Flash.ocx is the newer Version

I think you must update to Flash Player Version 8.0.24.0. Macromedia has the same Security Problem with your Flash player. Macromedia has fixed this Problem in March 2006. See here for Direct Download and here for Versionscheck KB913433 from MS fix only the Flash Player Vers. 6.xxx. This Version is intergrated in WinXP SP2. I have install the Flash Player 8.0.24.0 with the Switch /Q:A /R:N and have not Problems

Hi ner, i use the Switches /Q:A /R:N for this Patch. You must not install KB913433, if You have install the Player 8.0.24.0 (use the same Switches)

You can save your complete Workspace in a *.PspWorkspace -File with PSP X. With this file You can restore all PSPX-Workspace- Settings, Toolbar and her Positions, all Iconbars etc. The saved Workspace can you load with this reg entry: HKEY_CURRENT_USER\Software\Corel\Paint Shop Pro\10\WorkspaceMRU "File1"="your Path to the saved *.PspWorkspace _ File"

Hi cyberloner, open the pspx.msi with Orca Tool or another msi Editor. You can find in the Property Table both YAHOO Switches with the default value =1. During the normaly silently Install the Yahoo!-Tool bar with pop-up blocker will install. With the PSP_YAHOO ... Switches =0 the Tollbar will not install. It's works for me. I have the german Upgrade- & Download Version from PSPX.

Hi allz, thx for the PSPX Switches. PSP_INSTALLRCM=1 install the Entry in Rightclickmenu from the Folders. The Name of the Entry is "Browse with Paint Shop Pro X" there are still more switches PSP_YAHOO=0 PSP_InstallYahoo=0 Yahoo!-Tool bar with pop-up blocker will not install

I've got O&O defrag version 6.5.851. The setup runs but not unattended, it keeps me asking to accept the EULA, install path and so on. Is this normal or do I make a mistake?? Thank you for helping extrakt the exe File (oodpe_6_5_851_XXX.exe) with Winrar. rename the O&O Defrag Professional Edition.msi to e.g. OODefrProf.msi and run it with the switches /qn it works

@bumjack Motherboard monitor is more complicated. Usually worked the setup about the Innosetup method but the program causes a bug after the Installion because the mbmiodrvr.sys driver software wasn't tied completely. Load the Installshield Repacker for you down here and then create the snapshot dump method a *.msi file about. With me it has worked. There I into the *.msi file mean Settings and have tied my motherboard, however, I cannot offer this to you for the download. Are you a german see here.

Logitech iTouch: %systemdrive%\install\Logitech\it.exe -s -a -s -f1%systemdrive%\install\Logitech\itsetup.iss"use this *.iss file: [installShield Silent]Version=v6.00.000File=Response File[File Transfer]OverwrittenReadOnly=NoToAll[{036AA4D4-6D32-11D4-9875-00105ACE7734}-DlgOrder]Dlg0={036AA4D4-6D32-11D4-9875-00105ACE7734}-SdLicense-0Count=4Dlg1={036AA4D4-6D32-11D4-9875-00105ACE7734}-SdAskDestPath-0Dlg2={036AA4D4-6D32-11D4-9875-00105ACE7734}-SdSelectFolder-0Dlg3={036AA4D4-6D32-11D4-9875-00105ACE7734}-SdFinishReboot-0[{036AA4D4-6D32-11D4-9875-00105ACE7734}-SdLicense-0]Result=1[{036AA4D4-6D32-11D4-9875-00105ACE7734}-SdAskDestPath-0]szDir=C:\Programme\Logitech\iTouchResult=1[{036AA4D4-6D32-11D4-9875-00105ACE7734}-SdSelectFolder-0]szFolder=Logitech\iTouchResult=1[Application]Name=iTouchVersion=CurrentVersionCompany=LogitechLang=0007[{036AA4D4-6D32-11D4-9875-00105ACE7734}-SdFinishReboot-0]Result=1BootOption=0and the iTouch settings found You under the registry key: [HKEY_CURRENT_USER\Software\Logitech\iTouch]

Download here the InstallShield Repacker. I have repacked the Microangelo Setupfile to a *.msi File. Use the Setup Monitoring Method. Or use this *vbs File to answer your Setupquestions Code m558Setup.vbs: Set WshShell = WScript.CreateObject ("WScript.Shell")WshShell.Run ("C:\...\Microangelo\m558.exe -s -a -s -f1" & Chr(34) & "C:\...\Microangelo\setup.iss" & Chr(34))WScript.Sleep 20000WshShell.AppActivate "Microangelo Setup"WScript.Sleep 100WshShell.SendKeys "%{F4}"WScript.Sleep 100WshShell.SendKeys "{ENTER}"WScript.Sleep 1000WshShell.AppActivate "Microangelo Help"WScript.Sleep 100WshShell.SendKeys "%{F4}"Set WshShell = NothingWScript.Quitand use this *.iss File see below setup.iss setup.iss

extract both dowloaded .exe files with Winrar, make for both a setup.iss file with the commandsetup.exe -R for more Informations see here than echo. echo Installing Logitech Keyboarddriver, please wait... start /wait %DlDriver%\Logitech\it221deu\setup.exe -s -f1"%DlDriver%\Logitech\it221deu\setup.iss" echo. echo Installing Logitech Mousedriver, please wait... start /wait %DlDriver%\Logitech\mw9791deu\setup.exe -s -f1"%DlDriver%\Logitech\mw9791deu\setup.iss" and the settings: echo. echo Installing Mouse + Keyboardsettings, please wait... start /wait REGEDIT /S %DlDriver%\Logitech\Key_Mouse_Settings.reg Key_Mouse_Settings.reg: Windows Registry Editor Version 5.00 [-HKEY_CURRENT_USER\Software\Logitech] [HKEY_CURRENT_USER\Software\Logitech] ... Export the necessary entries from a full installed System in this .reg file.