Tinnitus

Now he found the driver on the CD and detected my RAID 1 Volume. I installed Windows and rebooted and get a message that Windows could not access the hardisk folders for some reason. Update: Started Rescue mode and did a bootcfg /rebuild which correctly adds a multi(0)... boot entry to boot.ini. Afterwards he searches for iastor.sys or iastor.sy_ and I have to select the i386 folder manually. Cannot this be done automatically?

Okay I found out that I did not use the right folder for the ICH7 controller. There is a folder for a driver disk containing: iaahci.cat iaahci.inf iastor.cat iastor.inf iastor.sys textsetup.oem Looks like the info contained in these .inf files is already in the storage.ini provided in this thread. Ill give it another try WITH the correct files. (switching back to JMicron controller) Maybe I should write Jraid instead of jraid? iaahci.inf iastor.inf

That did not work I connected the drives to the ICH7R Controller and configured them as a RAID 1 Volume, but the created installation CD will not detect the drive. I edited the storage.ini (which I took from the first post) and added what you told me (concerning the JMicron controller). Also, I copied all .cat and .inf from the Chipset driver (ICHxx.inf ICHxx.cat) to the STORAGE-Directory. I guess I have to add something for the Chipset driver, too. storage.ini

Hi there. After reading many threads about how to do the integration (other forums, too) I must admit that I am quite like . I want to integrate the drivers for the Controllers on the Asus P5W DH Deluxe (mainboard popular with many gamers) in order to avoid pressing F6 (I don't have a floppy drive). Actually it contains 3 Controllers, the ICH7R Southbridge, Jmicron JMB363 SATA, Silicon Image 4723 Hardware RAID Controller (EZ Backup). For the JMicron Controller there is a folder for the disk to be created on the support cd, containing these files: jgogo.sys jraid.cat Jraid.sys jraid_finf (attached) txtsetup.oem (attached) I was editing the storage.ini like the following, but got stuck with the first value. However, you were diskussing a different method. [HardwareIdsDatabase] PCI\VEN_197B&DEV_2360&CC_0104 = " ", "JMicron JMB36X Controller" ... The ICH7R Southbridge RAID Controller drivers are included in the chipset drivers. I attached the corresponding inf-file, too. Could anyone help me integrating these drivers? I could test the result for you jraid_f.inf ich7core.inf txtsetup.oem.txt