andreasfc Posted May 22, 2007 Share Posted May 22, 2007 I am looking for a quick setup guide on how to setup a Terminal server with Load Balancing or Clustering.We have a server which has 2 network cards, and on both servers the NIC's are configured with load balancing.But when connecting to the inside Ip Adres of the Load Balancing adres I always get the same server, and on the other side when connecting it only work on one server.Thanx Link to comment Share on other sites More sharing options...
nmX.Memnoch Posted May 22, 2007 Share Posted May 22, 2007 These should help:http://support.microsoft.com/kb/243523/EN-US/http://technet2.microsoft.com/windowsserve...3.mspx?mfr=true Link to comment Share on other sites More sharing options...
cluberti Posted May 22, 2007 Share Posted May 22, 2007 mmX.Memoch is correct, but from what I understand your query to be, this is what you're trying to do. Link to comment Share on other sites More sharing options...
andreasfc Posted June 11, 2007 Author Share Posted June 11, 2007 Ok, i have the terminal servers working now, but. When configured NLB on both servers I am unable to ping the 1st server.When disabling NLB on one server I am able to ping that server. Anyone knows what is causing this problem?Thanx Link to comment Share on other sites More sharing options...
cluberti Posted June 11, 2007 Share Posted June 11, 2007 Did you configure these servers in unicast or multicast mode? Link to comment Share on other sites More sharing options...
andreasfc Posted June 11, 2007 Author Share Posted June 11, 2007 Both servers are configured Unicast. Link to comment Share on other sites More sharing options...
cluberti Posted June 11, 2007 Share Posted June 11, 2007 If they're both configured unicast, and you of course have two network interfaces configured for the nlb cluster, the only other thing it could possibly be would be the metric on the interface itself, or the switch(es) the machines are attached to. Link to comment Share on other sites More sharing options...
andreasfc Posted June 16, 2007 Author Share Posted June 16, 2007 Is there anyone who has a short how to on setting up Terminal Server?Both servers are working, but when configured WLBS on the second server Load Balancing is not working anymore.Some questions:1. NLB is only needed for two servers?2. Do I need Session directory?3. Do I need to configure Clustering?Thanx Link to comment Share on other sites More sharing options...
cluberti Posted June 16, 2007 Share Posted June 16, 2007 1. NLB is only needed if you want to set up session directory.2. You don't need it for a TS farm specifically, but if you want users to be able to disconnect and reconnect to the same session every time, you will need to use it.3. Terminal Services doesn't support clustering, only NLB/Session Directory.If you're having NLB problems with your servers, make sure you've configured everything properly as per the TS Session Directory documentation.If you've configured everything as per the documentation, but find that you cannot ping or connect to one (or both) servers after configuring NLB, then you have a problem with your switches not liking the fact that a unicast address is coming from a multicast MAC address, and you need to address this with the switch vendor themselves, or their documentation. In general, NLB works much better with managed switches than unmanaged, especially L2 unmanaged. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now