Master image won't boot on AMD 64

[mcorben]

Hello Everyone, I could really use some help or at least which direction to go.

I've created single PC master image for computers here at my company generally without any problems.

I have Dell d610,d620,IBM t23,t30,t41,t42,Dell gx260,gx270,gx280,and the optiplex520.

My standard process has always been to gather all the drivers and place them into a folder that is pathed in sysprep so it can find them.

Everything has work without a problem.

Now our new PC is a Optiplex D740 which is a AMD 64 Athlon x2. Sysprep creates the image but when it starts to boot for the first time it just blue screens and reboots.

I don't think it ever gets to the sysprep stage as it happens so fast and I can't even read which error it's blue screening.

I'm sure this is because it is a AMD 64 and the rest were Intels. Aftering reading posts on this site I have a feeling

it is a problem with the HAL?? But not sure.

Any help or insight anyone could provide would be great. Thanks in advance!

sysprep file:

[unattended]

DriverSigningPolicy=Ignore

ExtendOemPartition=1

InstallFilesPath=sysprep\I386

; Replace OemPnPDriversPath with the path of the third-party

; device drivers (separate folders with a semincolon):

OemPnPDriversPath="\i386;\WINDOWS\Drivers\Network;\WINDOWS\Drivers\Audio;\WINDOWS\Drivers\Audio\DELL;\WINDOWS\Drivers\Modem;\WINDOWS\Drivers\Modem\w2kxp;\WINDOWS\Drivers\Mouse;\WINDOWS\Drivers\Other;\WINDOWS\Drivers\Video;\WINDOWS\Drivers\Video\DELL;\WINDOWS\Drivers\Video\DELL2;\WINDOWS\Drivers\Dellgx520;\WINDOWS\Drivers\Dell d610;\WINDOWS\Drivers\Dell d610\wireless;\WINDOWS\Drivers\Dell d620;\WINDOWS\Drivers\Dell d620\audio;\WINDOWS\Drivers\Dell 740"

OemPreinstall=Yes

OemSkipEula=Yes

ResetSourcePath=c:\

UnattendMode=FullUnattended

[GuiUnattended]

AdminPassword=*****

EncryptedAdminPassword=No

AutoLogon=Yes

AutoLogonCount=3

OEMDuplicatorstring="****"

OemSkipRegional=1

OemSkipWelcome=1

TimeZone=035

[GUIRUNONCE]

[userData]

FullName="******"

OrgName="******"

ComputerName=*

ProductKey=***************

[TapiLocation]

CountryCode=1

AreaCode=908

LongDistanceAccess="9,"

Dialing=Tone

[identification]

;DomainAdmin=Administrator

;DomainAdminPassword=Password

;JoinDomain=DOMAIN

JoinWorkgroup=WORKGROUP

; MachineObjectOU="OU=Accounts,DC=honeycutt,DC=corp"

[Networking]

[sysprep]

BuildMassStorageSection=Yes

[sysprepMassStorage]

[IcemanND]

if you do a clean install of windows from cd to the machine what HAL and mass storage controller is installed?

[mcorben]

After a new install the HAL is ACPI Multiprocessor PC and dthe IDE is a standard IDE Controller.

The image I built has Advancaed Configuration and Power Interface (ACPI) PC and a Intel 82801dbm Ultra Storage - 24ca

[mcorben]

Anyone have any ideas?

[Tounet]

Same problem here.

Do you find Any solutions ?

[Tounet]

I have a clue about the the intelppm drivers.

More info here http://www.runpcrun.com/0x0000007E