Unattended install of XP boot problem

[Phil_C]

Hello All

I have created a bootable CD with slipstreamed XP SP1 and Adaptec SATA drivers. The setup works and lets me complete the install of windows but on the first boot windows freezes about half way through the startup screen. If I restart the computer and select Safe mode it starts to list the drivers and gets to the mup.sys driver and freezes. If I do an attended install of windows and manually add the SATA drivers then windows installs and boots up fine and after adding in SP1 it still works fine. I cannot use SP2 as a graphics program I use will not run correctly with SP2 installed.

I don't know if it is the SATA drivers, the slipstreamed SP1 or something in the unattended install that is causing the problem. If the configuration files are needed then please let me know and I will post them. If the install program will allow the SATA drive to be used for an install wouldn't that mean the SATA drivers have been loaded in correctly?

Regards

Phil