I'm having problems with my installation during the Installing Devices stage. Anyway I made a cd that works perfect on one of my PCs the one with a Geforce 3. When I install it on my main comp with a Radeon 9800 and Nforce2 board (included drivers on the cd) I get problems when installing devices section of the GUI setup. It just hangs there and goes to black screen (monitor off) back to GUI setup and then black screen (monitor off) and back to GUI again. This happens over and over again at 34 mins to finish install. I've tried renaming my directories:

GART = 000

MEMCTRL = 001

SMbus = 002

IDE = 003

USB = 004

SATA = 005

ETHERNET = 006

Cat 3.7 = 007

Nvidia Display = 008

Nvidia Audio = 009

Logitech = 010

OemPnPDriversPath="Drivers\000;Drivers\001;Drivers\002;Drivers\003;

Drivers\004;Drivers\005;Drivers\006;Drivers\008;Drivers\009;Drivers\010"

Doesnt work.... Just hangs there and going black to gui black to gui over and over again....

Anyone wanan show me their OemPnPDriversPath with 3.7s and Nforce drivers???

Thanks.

try removing the graphics drivers and redo your test. If it works, then the problem lies in the graphics drivers you're using.

Ahh works now. I removed the Logitech drivers and it works now. Thanks..

hrm. strange that.