mmortal03 Posted July 21, 2006 Share Posted July 21, 2006 (edited) I am having some issues with nLite 1.0.1. This configuration file worked with nLite 1.0, but doesn't with 1.0.1. The install works all the way to the Windows loading icon screen, and then reboots and asks to go into safe mode. I have attached the configuration file without the automated networking section.Last_Session_nonet.ini Edited July 21, 2006 by mmortal03 Link to comment Share on other sites More sharing options...
mmortal03 Posted July 25, 2006 Author Share Posted July 25, 2006 I am still having this problem. I had to go back to nLite 1.0 so that this would not happen, which is limiting my use of the newest RyanVM updates. Any ideas? Link to comment Share on other sites More sharing options...
nuhi Posted July 25, 2006 Share Posted July 25, 2006 Did you try without any addons?First do that then please report what is actually causing that.Use CDRW or Virtual pcs if BSOD happens there too. Link to comment Share on other sites More sharing options...
mmortal03 Posted July 25, 2006 Author Share Posted July 25, 2006 (edited) I will try doing that later tonight, but honestly I don't follow why that needs to be ruled out, because this configuration, along with the extras,WORKS in 1.0 but is broken in 1.0.1. I even initially tried multiple combinations of settings and RyanVM packs before, thinking that it wasn't nlite, and none of them worked either.I didn't think that you changed any compatibilities between the two versions, but maybe you did in some subtle way? Edited July 25, 2006 by mmortal03 Link to comment Share on other sites More sharing options...
mmortal03 Posted July 26, 2006 Author Share Posted July 26, 2006 (edited) I have now tried 1.0.1 with the same config file as above, except now without any addons except RyanVM post-sp2 2.0.7a and drivers, and it still does the same thing. I will be trying it without drivers next, just for kicks, but my system is not going to run properly without them. Edited July 26, 2006 by mmortal03 Link to comment Share on other sites More sharing options...
mmortal03 Posted July 26, 2006 Author Share Posted July 26, 2006 Well, without any of the drivers integrated, it worked. So, what changed with 1.0.1 that would break driver integration? Link to comment Share on other sites More sharing options...
nuhi Posted July 26, 2006 Share Posted July 26, 2006 Do you have a SATA or RAID hdd, maybe try to test your chipset drivers, maybe you missed some folder to integrate...I really don't recall anything changed except that Textmode problem which could only solve things, not complicate it. Link to comment Share on other sites More sharing options...
mmortal03 Posted July 27, 2006 Author Share Posted July 27, 2006 (edited) I don't have a RAIDed hard drive. I have a SATA hard drive, but it doesn't need a third party SATA driver. My chipset driver, along with everything else, were included when I made the disc with 1.0.1; the same as with 1.0. So why would actually HAVING the drivers included mess things up, but NOT having them work? I have nLite set to remove any other drivers.Do you suggest that I try each one separately and then let you know which one is the culprit? Edited July 27, 2006 by mmortal03 Link to comment Share on other sites More sharing options...
mmortal03 Posted July 27, 2006 Author Share Posted July 27, 2006 I have determined that the Intel chipset driver is the culprit. It has two parts. I will try each one and see which part (or if both) are the problem. Link to comment Share on other sites More sharing options...
mmortal03 Posted July 28, 2006 Author Share Posted July 28, 2006 When I removed the "hdc" chipset driver (SP/ich5id2.inf) and left only the "system" chipset driver (865.inf) the installation worked. I will try it with the "hdc" driver again, just to confirm that it is the problem. Link to comment Share on other sites More sharing options...
mmortal03 Posted July 28, 2006 Author Share Posted July 28, 2006 I retested the disc. As I thought, there is something that goes wrong because of the "hdc" (SP/ich5id2.inf) Intel chipset driver. Any ideas why? Link to comment Share on other sites More sharing options...
mmortal03 Posted July 30, 2006 Author Share Posted July 30, 2006 Are drivers that are located in subfolders supported? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now