Riprep Problem

[tadj]

I've build a client windows 2000 workstation (Reference)

and I create an image of this client on the RIS server with Riprep, every thing is OK

But, when starting the remote installation after selecting this image the installation processes starts and within approximately one minute a bleu screen appears (PC Hanging)

[rion]

What's the info in this bluescreen ?

and the more info that you provide make it eaiser to solve

Cheers

[tadj]

The message on Bleu screen is :

****stop : 0x000000BB (0x00000003,0xC00000C0,0x00000000,0x00000000)

an initialization failure occured while attempting to boot from network

if this is the first time you've seen this, stop error screen, restart your computer,

if this screen apperas agine (yes screen apperas agine), follow this steps :

check to make sure any new hardware or software is properly installed

if this is a new installation, ask your hardware or software manufacture for any windows 2000 update you might need (Yes it is already done)

if the problem continue, disable or remove any newly installation hardware or software

disable bios memory option such as caching or shadowing.

if you need to use safe mode to remove or disable components, restart your computer press F8 to select advanced startup option and then select saf e mode (Yes I check this also )

refer to your getting started manuale for more information on troubleshooting stop errors.

Many Many... Thanks in advance

[maxamoto]

Try flashing the BIOS on the offending machine.

I also found this on Bink's website:

"I figured it out for my system. Maybe this will help someone else.

I am using RIS to install windows server 2003, standard embedded version, and I saw the blue screen with the message, "An Initialization error occurred while attempting to boot from the network"

The fix mentioned earlier did not work for me.

The Fix:

I found the drivers that shipped with my server for the onboard Intel GigE ports, and manually placed the e1000325.inf and E1000325.sys files in the RIS image directory under i386

(i.e. r:\RemoteInstall\Setup\English\.......\win-2k3-embsys\i386)

used the following two commands to restart the services (without the quotes). probably not needed, but did it anyway:

"net stop binlsvc"

"net start binlsvc"

no more blue screen."

Edited June 23, 2005 by maxamoto

[ITpro]

Found a ton of misleading and painful troubleshooting steps for the BSOD stop error message you are getting with RIS client (appears in WinPE as well)

I posted the quick and easy solution to this problem under my own thread.

http://www.msfn.org/board/index.php?showtopic=88903

Edited December 16, 2006 by ITpro