Rpcrt4.dll

[ajD123456]

MY computer just blue screened with the message the RPCTR4.Dll cannot be found and must be reinstalled. I downloaded and burned the DLL to a CD, then used a boot disk so that i had access to my CD Drive. But now how do I re-install this file? It keeps telling me I have a bad command...Hopefully someone can help me.

Thanks.

[dman]

MY computer just blue screened with the message the RPCTR4.Dll cannot be found

do you mean "rpcrt4.dll", the remote procedure runtime? maybe problem is just a typo?

copy the dll back where it belongs (windows\system32), then

from "run" box or command prompt type regsvr32 RPCRT4.Dll

this will re-register the dll. You will get a confirmation for success or failure.

[wullieb1]

Do you have access to the local drive??

You won't be able to access the drive from a boot floppy if its NTFS, without some other software, i use NTFS Pro from Winternals.

If it is FAT32 then you need to look at the commands your are typing into the command line. i would usually have the copy executable from youre PC on your floppy then use the following command

a:\Copy rpctr4.dll %systemroot%\system32

Substitute %systemroot% for your windows folder.

Hopefully this will work for you.

[purewaveform]

I would be carefull just replacing one file, usually when you get a bsod it is more than one file. a couple of questions.

1. Are you running system restore?

2. Do you make regular backups?

3. Have you tried booting from the CD and doing a restore?

4. Tried getting into Safe Mode?

find out what is the exact issue, also you can use BartsPE to get into the partition and then you can run a bunch of checks in there.

hope this helps.