Problem after integrated Forceware install.

**-= Mancubus =-** · January 17, 2005

Forceware 66.93 WHQL was integrated using nLite 0.99.7 beta.

My video is integrated MX400 with 32MB shared memory.

Monitor is LG Flatron ez T710PH. Its drivers were also integrated and successfully installed.

Section [Display] in winnt.sif says:

BitsPerPel=32

Xresolution=1024

YResolution=768

Vrefresh=100

These settings work for sure... though, maybe I remember wrong.

After successfull Windows installaton there is only one problem:

Despite above settings in winnt.sif Windows loads in 1024x768@100Hz@16BPP.

If I try to choose 32BPP, applet lowers resolution to 800x600.

Desirable settings are not choosable.

I found a workout. If I go to nVidia logo-ed applet in Display settings, I can choose 1024x768@85Hz@32BPP.

I remember, that with some version of Detonator/Forceware it was able to make 1024x768@100Hz@32BPP....

Maybe it is not possible with my video and monitor and my memory fails?

**jbm** · January 17, 2005

I had the same problem with a different nvidia card same driver.

Have tried restarting your computer after changing to 32bits BP.

If I remember right when I first started my computer it came up

in 640x480 32BP I was able to change to 800x600 32BP any hi res

would be 16BP. Anyway after changing to 800x600 and restarting

I was able to change to higher res with 32BP

Recommended Posts