adding drivers to 64bit XP?

[jbm]

Has anyone added drivers to a windows Pro x64 CD?

I have a K8N-E board and have succecfully added nvidia and si3114r drivers to my 32bit xp pro cd using green machines method.

But when I try that with the 64bit cd the nvidia drivers work but

the drives on the si3114r controller don't show up and I don't get

any errors. I tried coping the si314r drivers to the testmode folder

and using the [OEMbootfiles] and [MassStorageDevices] in Winnt.sif.

But when I do I get an error txtsetup.oem as caused an error (18) in line

1864 in ..... I can load them using F6 method OK. I can't test it

on virtual PC like I did with my 32bit CD. I put the $oem$ directory under

amd64 folder because thats were I found txtsetup.sif and the nvidia drivers

worked so I think thats correct. The funny thing is I removed the line

oempnpdriverspath from winnt.sif and the nvidia drivers still loaded.

could there be a problem with the txtsetup.oem file even though it works

with the F6 method. I relize the OS is still in beta so maybe thats the

problem anyway I'm rambling now. heres the txtsetup.oem file

; This file installs the SiI 3114 serial ATA RAID driver as part of text

; mode setup on 64-bit versions of Windows XP and Windows Server 2003.

;

; Copyright © 2003 by Silicon Image, Inc.

; All rights reserved

[Disks]

disk2 = "Silicon Image SiI 3114 SATARaid Driver Installation Disk",\amd64\Si3114r.inf,\amd64

[Defaults]

SCSI = Si3114r_AMD64

[sCSI] ; HwComponent section

Si3114r_AMD64 = "Silicon Image SiI 3114 SATARaid Controller (AMD 64-bit)"

[Files.SCSI.Si3114r_AMD64]

driver = disk2,si3114r.sys, Si3114r

driver = disk2,SiWinAcc.sys, SiFilter

inf = disk2,SI3114r.inf

;;catalog = disk2, Si3114r.cat

[HardwareIds.SCSI.Si3114r_AMD64]

id = "PCI\VEN_1095&DEV_3114&SUBSYS_61141095", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_288510F1", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_047AA0A0", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_0478A0A0", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_0479A0A0", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_90181695", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_F642270F", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_100415BD", "Si3114r"

id = "PCI\VEN_1095&DEV_3114&SUBSYS_81361043", "Si3114r"

[Config.Si3114r]

value = Parameters\PnpInterface, "5", REG_DWORD, 1

value = ProblemDevices, "", REG_SZ, ""

value = ProblemDevices, "Maxtor 4D060H3 DAK05GK0", REG_SZ, "MaxMode = UDMA-5"