Slipstreamed SP2 w/Intel RAID - Boot loops

[voodoodrul]

So I slipstreamed SP2 just fine... I'm running from that install now. But I followed Greenmachine's instructions and modified accordingly for my setup - (Ref http://greenmachine.msfnhosting.com/READING/addraid.htm) - which installs just fine. However, I get to loading XP for the first time after install and it locks up and reboots. If you watch the devices as it boots, it dies at agp440.sys, or just after loading that. I'm using the exact same drivers as we type, so it's not a problem with the drivers..

This is really annoying the hell out of me because I have to keep taking my machine apart to install the floppy (there is no open bays for a floppy anymore)

I'm running an Intel ICH5R in a Shuttle XPC SB75G2. I just need iaStor to actually work instead of hanging the machine.

[GreenMachine]

Welcome, voodoodrul, to MSFN!

I really don't know about that iaStor driver, as I do not have one to test. The symptoms definitly sound like a driver problem. If you could post your XPCREATE LOGFILES.CAB, and a link to the drivers you are using (or mail the drivers to address below), I can look into it further.