raid\sata drivers help

[mark_glh]

hi, ive been trying to integrate the raid\sata drivers into my unattended xp disc so i dont have to press F6 on startup to load the drivers from a floppy. ive tried following several of the threads on this forum including the masssStorage driverpack.

after trying the above i am still required to load drivers from a floppy disc.

i have a promise raid controller and 2 hdd's, one 80gb standard ATA and one 180gb sata.

ty in advance

[RyanVM]

If you have a Promise 378 controller, it's currently unsupported by that pack. If you have an Asus motherboard, that's likely to be your problem.

[mark_glh]

yes i do have an asus board.

thing is, if i put the promise drivers supplied with the driver pack on a floppy and run setup in the normal way it works.

is there a way i can get this supported or manually add the drivers? :S

[RyanVM]

http://greenmachine.msfnhosting.com/READING/addraid.htm

[mark_glh]

ty.

1 more thing. when doing this in sp2, which of the following lines should i use?

[sourceDisksFiles]

fasttx2k.sys = 1,,,,,,3_,4,1

or

[sourceDisksFiles]

fasttx2k.sys = 1,,,,,,4_,4,1,,,1,4

not sure what it all means, any help is appreciated :S