Jump to content

Txtsetup.sif help needed

Recommended Posts

Totally lost on the txtsetup.sif stuff but read the threads and hope I haven't messed this up too much. I got a ShuttleX AMD64 computer with the VIA SATA/Raid chip (I think). I looked at Green Machine's thread and managed to get the information listed below to work on my unattended install with a Seagate 120gb SATA drive.

My question is this: Since XP recognizes the drive and completes in installation with no problem does this mean I got the txtsetup.sif correct?

I'm hoping there are no 'down the road' problems with the driver setup. Would anyone look this over and see if it needs correcting/improving?

I followed Green Machine's guide and created the cab file, edited the winnt.sif file, and such but am only concerned if the txtsetup.sif is correct.

Thanks for any assistance! :)

[Edit:] I tried to download raiddrivers.rar but all the links were dead

------------------ Placed at the bottom of the txtsetup.sif right before the eof---------


viasraid.sys = 1,,,,,,3_,4,1


PCI\VEN_1095&DEV_3112&SUBSYS_31121095 = "viasraid"

PCI\VEN_1095&DEV_3112&SUBSYS_34238086 = "viasraid"

PCI\VEN_1095&DEV_3112&SUBSYS_311215D9 = "viasraid"

PCI\VEN_1095&DEV_3112&SUBSYS_B0021458 = "viasraid"

PCI\VEN_1095&DEV_3112&SUBSYS_01661028 = "viasraid"

PCI\VEN_1095&DEV_3112&SUBSYS_82141033 = "viasraid"

PCI\VEN_1095&DEV_3512&SUBSYS_35121095 = "viasraid"

PCI\VEN_1095&DEV_3512&SUBSYS_01661028 = "viasraid"


viasraid = viasraid.sys,4


viasraid = "VIA SATALink Controller"

Link to comment
Share on other sites

Look OK to me, with a quick glance. The syntax looks fine anyway, I assume the PCI values are correct.

My version looks like this:


VIASRAID.SYS = 1,,,,,,4_,4,1,,,1,4


PCI\VEN_1106&DEV_3149 = "VIASRAID"

I doubt that "viasraid.sys = 1,,,,,,3_,4,1" makes a difference, but I am not sure ...

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Create New...