bmill99 Posted August 11, 2004 Share Posted August 11, 2004 I used to be able to put my computer in S3 stand by mode in WinXP SP1, but now I'm unable to put it in Standby after installing slipstreamed WinXP SP2. Any Idea? Link to comment Share on other sites More sharing options...
Alanoll Posted August 11, 2004 Share Posted August 11, 2004 improper driver is usually the cause. See if you have updated system drivers. Link to comment Share on other sites More sharing options...
hp_spec Posted August 11, 2004 Share Posted August 11, 2004 Same thing here, although i don't care Link to comment Share on other sites More sharing options...
bmill99 Posted August 11, 2004 Author Share Posted August 11, 2004 found the source of culprit... it's my VIA SATA RAID Controller Driver, altho i slipstreamed the driver and loaded up just fine... but it show up as "SCSI RAID" instead of "VIA SATA RAID Controller" under device manager. Tried manual updating driver, and this solved problem. but I dont want to do this every time I reformat, whole purpose behind unattend is "set it and forget it"I've tried changing lines on TXTSETUP.SIF[sourceDisksFiles]viasraid.sys = 100,,,,,,3_,4,1,,,1,4This one worked perfectly and no plms for SP1 with 2.20 driver (very old driver)TO[sourceDisksFiles]viamraid.sys = 100,,,,,,3_,4,1,,,1,4This one is new 3.10 driver and i'm using SP2even i tried[sourceDisksFiles]viamraid.sys = 1,,,,,,4_,4,1,,,1,4So far I still couldn't fix itI'ved tried going back with old drivers but it doesnt work with SP2 (alot of errors and crashing)EDIT: viasraid.sys is old driver, and they changed it to viamraid.sys, dunno why they changed the name. Link to comment Share on other sites More sharing options...
bmill99 Posted August 11, 2004 Author Share Posted August 11, 2004 Bump, Could the Mods move this thread to device drivers?Thanks Link to comment Share on other sites More sharing options...
bmill99 Posted August 11, 2004 Author Share Posted August 11, 2004 i guess i'll bump it one more time.EDIT: 310E driver isn't whql signed maybe that's the problem. Checked out my motherboard's site and download WHQL 300B driver & hopefully it'll help. Link to comment Share on other sites More sharing options...
bmill99 Posted August 11, 2004 Author Share Posted August 11, 2004 Yay i solved it myself, 300B worked right off the bat! Thanks for no suggestion or tip or whatoever... what kind of support thread is this? Well you want me to kiss your a**Well bend over, buddy, here comes my footI don't need your crying a** $hitWell I want you to contributeAll I got is blood for youJust kidding! Link to comment Share on other sites More sharing options...
shanssv Posted August 26, 2004 Share Posted August 26, 2004 hi,I am also having the same problem i am having KV8-MAX3 (64bit) mother boardplease tell me which driver i should use ??please help meThanxshan Link to comment Share on other sites More sharing options...
Christer Tamm Posted August 26, 2004 Share Posted August 26, 2004 I have also had this problem, and I believe I shared a solution in a similar thread, but since the search function sucks I can't find it. (Or maybe I suck at using the function.) So I'll write it here again:Windows setup is very picky with digital driver signing. Even if you integrate new and fresh SATA and/or RAID drivers on the CD, these will only be used for the install process; the finished Windows system will have much older ones installed, because they are digitally signed and the new ones are not. There is a workaround to this, however. Go to Programs>Administrative Tools>Computer Management. Click "Device Manager" in left pane. In the right pane, click "SCSI and RAID controllers" and then "RAID controller". In the "RAID Controller Properties" window that comes up, choose "Driver" tab. Most likely, you will see a digitally signed driver which is *very* old. Now choose "Update driver", install "from a list or specific location" and "don't search". Chanses are your new driver (which was copied by setup from the CD) is available there. Choose it, and ignore the warnings about it not being digitally signed. Reboot. Now "Standby" will (probably) work.At least it did for me. Link to comment Share on other sites More sharing options...
shanssv Posted August 27, 2004 Share Posted August 27, 2004 Hi,Please tell me where can i download 300B driver ,please help me .ThanxShan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now