Integrate Promise SATA378/RAID

[gret]

hi everyone,

has anybody successfully integrated both promise sata378 and promise fasttrak with setup?

i've gotten most of it to work except for promise sata378 and promise fasttrak. it's because they have the same hardware id in the database

can anyone help? or any suggestions?

cheers,

gret

[Jazkal]

When you say they have the same ID, how far is it the same?

you have Vendor ID, Device ID, and SubSystem ID. All 3 are the same, or just 2?

[peachy]

My unattended install has both the FastTrack and SATA FastTrack 376/378 drivers working without a problem. My txtsetup.sif contains the following:

[HardwareIdsDatabase]
PCI\VEN_105A&DEV_6268 = "Fasttrak"
PCI\VEN_105A&DEV_3376 = "fasttx2k"
PCI\VEN_105A&DEV_3373 = "fasttx2k"

and

[SCSI]
FastTrak = "WinXP Promise FastTrak100 TX2/TX4 (tm) Controller"
fasttx2k = "WinXP Promise FastTrak 376/378 (tm) Controller"

[gret]

hey, peachy...

so you have both fasttrak378 and sata378 working??

i'll try your codes if you don't mind

[maxamoto]

My unattended install has both the FastTrack and SATA FastTrack 376/378 drivers working without a problem. My txtsetup.sif contains the following:

[HardwareIdsDatabase]
PCI\VEN_105A&DEV_6268 = "Fasttrak"
PCI\VEN_105A&DEV_3376 = "fasttx2k"
PCI\VEN_105A&DEV_3373 = "fasttx2k"

and

[SCSI]
FastTrak = "WinXP Promise FastTrak100 TX2/TX4 (tm) Controller"
fasttx2k = "WinXP Promise FastTrak 376/378 (tm) Controller"

<{POST_SNAPBACK}>

Hey Peachy, what mobo are you using, if you don't mind me asking? I'm running a P4C800 Deluxe, and I get the infamous file copy errors during unattended setups. I know this has been covered hundreds of times in several posts/forums, but there really doesn't seem to be a definitive working guide for this particular motherboard.