i have this driver, for intel 536ep modem. all other drivers are installed fine

chipset, nvidia, sound, etc.

The driver has 4 files: intels51.cat, intels51.inf, intels51.sys, migrate.dll

after the setup, all drivers are installed, exept this one.

in setupapi.log says:

"#I022 Found "PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00" in C:\WINDOWS\inf\intels51.inf; Device: "Intel® 536EP Modem"; Driver: "Intel® 536EP Modem"; Provider: "Intel Corporation"; Mfg: "Intel Corporation"; Section name: "Intels51".

#I087 Driver node not trusted, rank changed from 0x00000000 to 0x00008000.

#I023 Actual install section: [intels51.NT]. Rank: 0x00008000. Effective driver date: 05/22/2003.

#I022 Found "PCI\VEN_8086&DEV_1040" in C:\WINDOWS\inf\intels51.inf; Device: "Generic Intel® 536EP Modem"; Driver: "Generic Intel® 536EP Modem"; Provider: "Intel Corporation"; Mfg: "Intel Corporation"; Section name: "Intels51".

#I087 Driver node not trusted, rank changed from 0x00002001 to 0x0000a001."

........... more blah blah blah

"#I060 Set selected driver.

#I058 Selected best compatible driver.

#-124 Doing copy-only install of "PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00\4&1F7DBC9F&0&18F0".

#E360 An unsigned or incorrectly signed file "c:\windows\inf\intels51.inf" for driver "Intel® 536EP Modem" will be installed (Policy=Ignore). Error 1168: Element not found.

#-167 SPFILENOTIFY_NEEDMEDIA: Tag = "", Description= "Intel® 536EP Installation Disk", SourcePath = "I:", SourceFile = "Intels51.sys", Flags = 0x00000400.

#E169 SPFILENOTIFY_NEEDMEDIA: returned FILEOP_ABORT. Error 1223: The operation was canceled by the user.

#W187 Install failed, attempting to restore original files."

what's wrong?

your modem might be faulty, u can try it on other system to test whether it is working or not. or else u might need to redownload the driver again.

Regards,

kenkueh

the modem works fine, if i install the driver "by hand".

I want it to be done by setup.

And I can't figure it out from the log what's wrong.

I looked inside the inf file and at the source file is listed only the sys file

"[sourceDisksFiles]

Intels51.sys=1

[CopyFileSection]

Intels51.sys,,,2"

so I think there is no file missing