Seagate Barracuda 7200.10 - Unable To Load Overlay 01|000A

[drh]

I'm having a problem with my 7200.10 320GB drive, it is not recognized by the BIOS. I can get into the diagnostic terminal and watch the drive start up and I get the following errors:

Reset
4096k x 32 DRAM
GALAXY - 1_Disk    S-6D   09-22-06_15:48

Buzz HM SFI
!
(P)SATA Reset
DiskAccess ReadSector EC=47 at ffffffff.00.0002
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002                                 

Read Ver Retrys                                                                 
DiskAccess ReadSector EC=47 at ffffffff.00.0002                                 

Read Ver Retrys                                                                 
DiskAccess ReadSector EC=47 at ffffffff.00.0002                                 

Read Ver Failure!                                                               
DiskAccess ReadSector EC=47 at ffffffff.00.022b                                 
Failed sys sect. write! Nwt Er 00 RdWr 15c4b.00.022b                            
DiskAccess ReadSector EC=47 at ffffffff.00.0080                                 
DiskAccess ReadSector EC=47 at ffffffff.00.0080                                 
Unable To Load Overlay 01|000A                                                  

>                                                                               
T>

I've tried a couple of things, like resetting SMART (1>N1) but that doesn't work. Does anyone who is more knowledgeable about Seagate drives have some more commands I could try to diagnose and/or fix this problem?

Thanks.