Guest jeffspeff Posted July 25, 2010 Posted July 25, 2010 So, I've been messing around with WAIK for a while now, and I've made some pretty good wim images. However I wasn't satisfied. What I've tried to do is install Win7 to a VHD file. I then booted from it and installed all my goodies that I never could get to work right in WAIK. I then used imagex to capture and compress my finished vhd and convert it into a .wim file. I used the same bcd file as I've been using, also, I'm booting from USB. The paths in the bcd point to the .wim file and also reference the ramdisk like it's supposed to. I added the FBWF registry keys located in HKLM\CurrentControlSet001\Services\ from my best working WIM. If you don't know, the FBWF file specifies things like ramdisk size, ramdisk driver, and some other stuff. I know it's essential to winpe booting, but not sure if it's the same way for a full blown version of win7.The error I get now when attempting to boot my hybrid wim is that it can't find a required boot device. I got this error before when messing with a winpe wim and bcd was referencing an invalid location for the ramdisk. So my question is how do you go about setting a ramdisk upon boot?I would be more than happy to share my finished iso or wim when i get it all done. It's going to be pretty sweet.
CoffeeFiend Posted July 25, 2010 Posted July 25, 2010 I would be more than happy to share my finished iso or wim when i get it all done. It's going to be pretty sweet.You should have read the forum rules. Too late now.
Recommended Posts