This device cannot start (Code 10)

[rodommoc]

I have a Promise SATA300 TX4 IDE Controller:

PCI\VEN_105A&DEV_3D17&SUBSYS_3D17105A&REV_02

PCI\VEN_105A&DEV_3D17&SUBSYS_3D17105A

PCI\VEN_105A&DEV_3D17&CC_018000

PCI\VEN_105A&DEV_3D17&CC_0180

XP SP3 (I have tried SP2 with the same result)

Using Driverpacks.net plugin DPs_BASE_8123 and latest driverpack DP_MassStorage_wnt5_x86-32_901

I have googled the error and can't find anything.

The same error comes up on Dell PE Servers with Perc SAS or SATA controllers.

As well as a Dell Latitude 630 laptop.

I have asked in Driverpacks.net forum and they were unable to help. They suggested I move the card to a different slot and I did with the same result.

I have an older BartPE disk with older DPBASE & MassStorage pack that works. So I know the hardware works. It just does not work with the newer drivers.

maye I'll look for an older DPBASE(805 does not work) and an older, known good driverpack and see if that can work.

Anyone see this error code?? Or have any suggestions?

Thanks

Mark