Clueless.. loading LSI SAS w/ WinPE for W2003std unattended

[calitan]

I need to do a RIS installation of 2003std using WinPe for an HP ProLiant ML110 G5. The G5 has a the SAS card model SC40Ge with one SAS HD attached. I have changed no BIOS settings at this time.

First thing I did was update the WinPE ISO with the SAS drivers.

Then edited the winpeoem.sif.

When those are done I created my ISO and can boot to my image builder and select 2003 from the server. After it copies the files from the server and I think loads the OS the the HD it then reboots and I get the BSOD = STOP: 0x0000007B (0XF789E63C, 0xC0000034, 0x00000000, 0x00000000)

My guess..I think this is because the SAS card is not being recognized by the drivers but am not sure why I see the setup screen.

I think I need to load the SAS drivers to my unattended server location but am not sure if the $OEM$ location is the spot. I have created 3 different folders with all drivers from HP that might work for the SAS card and no luck.

I have other servers that use this 2003 unattended location that will hopefully not be affected. Any advice would be helpful.