giarc Posted January 4, 2008 Share Posted January 4, 2008 Hi all,Am trying to create an unattended CD for the machines we use in the office, these are Dell Precision 530, 670, 690 & 390.This is for the text mode setup portion of the install.I have merged the txtsetup.oem files into one, but the problem that I have is that two of the driver files are named symmpi.sys.One of them is for the LSI Logic Ultra 320 in the P530, and the other is for the Dell SAD 5ir/6ir in the P690 & P390.So obvioulsy I cannot include both sets of files.Can I simply just rename the files of one set of drivers, or is it a bit more complicated than that?Below is my merged txtsetup.oem file to include all three drivers.[Disks]# Dell Precision 530d1 = "LSI Logic Ultra320 1020/1030 Driver (XP)", \symmpi.tag, \# Dell Precision 670d2 = "Adaptec U320 SCSI HostRAID Controller", \hraidsk1# Dell Precision 390, 690d3 = "Dell SAS 5x and SAS 6x Controller Driver (Windows XP 32-bit)",\symmpi.tag,\[Defaults]scsi = SYMMPI_XP32scsi = ADAPTEC_U320HOSTRAIDscsi = DELL_SAS[scsi]SYMMPI_XP32 = "LSI Logic Ultra320 1020/1030 Driver (XP 32-bit)",symmpiADAPTEC_U320HOSTRAID = "Adaptec U320 SCSI HostRAID Controller"DELL_SAS = "Dell SAS 5x and SAS 6x Controller Driver (Windows XP 32-bit)",symmpi[HardwareIds.scsi.SYMMPI_XP32]id = "PCI\VEN_1000&DEV_0621", "symmpi"id = "PCI\VEN_1000&DEV_0622", "symmpi"id = "PCI\VEN_1000&DEV_0624", "symmpi"id = "PCI\VEN_1000&DEV_0626", "symmpi"id = "PCI\VEN_1000&DEV_0628", "symmpi"id = "PCI\VEN_1000&DEV_0030", "symmpi"[HardwareIds.scsi.ADAPTEC_U320HOSTRAID]id = "PCI\VEN_9005&DEV_809F","a320raid"id = "PCI\VEN_9005&DEV_8090","a320raid"id = "PCI\VEN_9005&DEV_8091","a320raid"id = "PCI\VEN_9005&DEV_8092","a320raid"id = "PCI\VEN_9005&DEV_8093","a320raid"id = "PCI\VEN_9005&DEV_8094","a320raid"id = "PCI\VEN_9005&DEV_809E","a320raid"id = "PCI\VEN_9005&DEV_808F","a320raid"id = "PCI\VEN_9005&DEV_8080","a320raid"id = "PCI\VEN_9005&DEV_8097","a320raid"# Rev B IDsid = "PCI\VEN_9005&DEV_809D","a320raid"id = "PCI\VEN_9005&DEV_809C","a320raid"id = "PCI\VEN_9005&DEV_8095","a320raid"id = "PCI\VEN_9005&DEV_8096","a320raid"[HardwareIds.scsi.DELL_SAS]id = "PCI\VEN_1000&DEV_0054&SUBSYS_1F041028", "symmpi"id = "PCI\VEN_1000&DEV_0054&SUBSYS_1F061028", "symmpi"id = "PCI\VEN_1000&DEV_0054&SUBSYS_1F071028", "symmpi"id = "PCI\VEN_1000&DEV_0054&SUBSYS_1F081028", "symmpi"id = "PCI\VEN_1000&DEV_0054&SUBSYS_1F091028", "symmpi"id = "PCI\VEN_1000&DEV_0058&SUBSYS_1F0E1028", "symmpi"id = "PCI\VEN_1000&DEV_0058&SUBSYS_1F0F1028", "symmpi"id = "PCI\VEN_1000&DEV_0058&SUBSYS_1F101028", "symmpi"id = "PCI\VEN_1000&DEV_0058&SUBSYS_021D1028", "symmpi"[Files.scsi.SYMMPI_XP32]driver = d1,symmpi.sys,SYMMPIinf = d1,symmpi.infcatalog = d1,mpixp32.cat[Files.scsi.ADAPTEC_U320HOSTRAID]driver = d1,a320raid.sys, a320raidinf = d1,a320raid.infinf = d1,a320mgt.infcatalog = d1,a320raid.catcatalog = d1,a320mgt.cat[Files.scsi.ADAPTEC_U320HOSTRAID_NT4]driver = d2,a320raid.sys, a320raidinf = d2,a320raid.inf[Files.scsi.DELL_SAS]driver = d1,symmpi.sys,SYMMPIinf = d1,symmpi.infinf = d1,delpseud.infcatalog = d1,mpixp32.cat[Config.SYMMPI]value = Parameters\PnpInterface,5,REG_DWORD,1[Config.a320raid]value = "", Group, REG_SZ, "SCSI Miniport"value = "", Start, REG_DWORD, 0value = "", Tag, REG_DWORD, 1value = "", Type, REG_DWORD, 1 Link to comment Share on other sites More sharing options...
giarc Posted January 4, 2008 Author Share Posted January 4, 2008 ah cheeky.just cheked and I can get windows setup to locate the hard drive on a P530 using the P690/P390 symmpi drivers.so no need to inlcude them Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now