Problem with drivers

[devolic]

I used nlite to integrate drivers, most are fine however.

(1) The nvidia control panel when clicked does nothing, however resolution can be changed and the card is being recognized.

(2) My drivers for the hauppauge card displayed an exclamation point. So I had to manually re-install the drivers.

(3) The drivers for my UPS didn't get installed for some reason.

(4) My network settings never stay, they default to DHCP.

This is such a nice program by the way. Is it best to use nlite to integrate drivers or to use a different method?

[craigdh]

I don't think you intergrated them right, Try:

* Download your mainboard driver setup from the NVIDIA website, than right click on the setup, choose "Extract to 6.86_nforce_win2kxp_international_whql" or what ever your setup is called. Wait until the extracting is done. then with nLite click the insert button, then select the newly created folder of your extracted mainboard drivers and it's done.

* Repeat the same steps for your graphics driver setup.

After it's all done there shouldn't be any problems.